A Partition-Computing Mechatronics Dynamics Modeling for Superconducting Electrodynamic Suspension and the Analysis on the Discrete-Track Irregularity
- 11 June 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 1901-1914
Abstract
Superconducting electrodynamic suspension (EDS) is one of the potential schemes for high-speed rail transit. However, the electrodynamic dynamics modeling and the characterization of the irregularity of discretely-distributed null-flux coils are great challenges. In this study, a partition-computing mechatronics dynamics model that can reflect the high-frequency vibration and self-excited vibration is established. The design of frame spacing, irregularity and load spectrum are studied by our model, which cannot be calculated by the linear models before. Firstly, it is recommended that the frame spacing be greater than 12.6 m to ensure the same levitation performance of the frame. Secondly, the equivalent geometric irregularity model is established according to the geometric position of discretely-distributed coils. The main source of vibration is the mid-long-wave for geometric irregularity. According to the measured coils, the electrical parameters obey the normal distribution. The inductance irregularity, as the greatest impact of circuit irregularity, will cause relatively severe vibration. The standard deviation of the inductance of the engineering coil is recommended to be below 4.68×10 -6 H. Additionally, the load spectrum increases by 24%-76% compared with the design value.Keywords
Funding Information
- China Academy of Engineering Consulting Research Project (2022-XBZD-20)
- Sichuan Science and Technology Program (2022JDTD0011)
- National Natural Science Foundation of China (52077178)
This publication has 53 references indexed in Scilit:
- Numerical modelling of electromechanical coupling behaviors in HTS coil with implementation of H formulation in FE softwareSuperconductivity, 2024
- A detailed comparison of the composition of (RE)-Ba-Cu-O-Ag bulk superconductorsSuperconductivity, 2024
- Machine learning driven optimization and parameter selection of multi-surface HTS MaglevPhysica C: Superconductivity and its Applications, 2023
- Numerical modelling of high-temperature superconducting dynamos: A reviewSuperconductivity, 2022
- Simultaneous identification of the frequencies and track irregularities of high-speed railway bridges from vehicle vibration dataMechanical Systems and Signal Processing, 2021
- A three-dimensional modal theory-based Timoshenko finite length beam model for train-track dynamic analysisJournal of Sound and Vibration, 2020
- Stochastic analysis model for vehicle-track coupled systems subject to earthquakes and track random irregularitiesJournal of Sound and Vibration, 2017
- A novel model for determining the amplitude-wavelength limits of track irregularities accompanied by a reliability assessment in railway vehicle-track dynamicsMechanical Systems and Signal Processing, 2017
- Magnetic damping of the electrodynamic suspension-type superconducting levitation systemElectrical Engineering in Japan, 1999
- Analysis of characteristics of repulsive magnetic levitated train using a space harmonic techniqueElectrical Engineering in Japan, 1980