Experimental and Numerical Study of the Response of Granular Layer in the Trap-door Problem

Authors:

Abstract
Deriving from the traditional problem of behavior of granular materials in silos, the trap‐door test is a very basic experimental test that reproduces solicitation met in a wide range of technological applications (soil reinforcement, granular material storage…). In spite of the fact that many analytical models exist for the description of this test, a large part of the behavior of granular layers submitted to a localized basal relative displacement remains obscure: influence of the displacement value, value of the friction angle of the granular matter… Carried out in quasi‐static motion and involving several granular materials such as gravels and sands, the experimental study brought to light that trap‐door tests systematically break down into three different successive phases depending on the amplitude of the trap‐door. Pressure applied on the trap‐door by the granular material decreased suddenly for very low displacement values. Then a progressive increase was observed coinciding with a progressive expansion of a subsiding zone from the bottom of the layer to its top. At last the pressure stabilized for the greater displacements of the trap‐door. This last phase corresponded with the classical failure pattern used in analytical solutions: a vertical slipping plane at each edge of the trap‐door. Because of very different response were obtained with sand and gravel, particularly in the transitional phase, a numerical study were carried out by means of Discrete Element Method. Involving simple spheres and complex shaped particles as clumps, a wide range of materials presenting various friction angles were tested. A neat influence of the peak friction angle on the maximal load transfer phase was observed whereas the last phase was associated with the residual friction angle. In addition, a micromechanical analysis, giving the localization of shear strains underlined the effect of the friction angle on the pattern of arching observed in the material.