Thiosulfate Corrosion in Paper-Machine White Water
Author:
- 1 October 1985
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 41 (10) , 587-591
Abstract
Potentiostatic, potentiodynamic, and immersion tests were conducted on a range of alloys used in paper-machine service. It was found that thiosulfate contamination of white water can cause pitting in AISI 304 and CA-15 stainless steels (SS), and, by comparison, salts such as NaCl, Na2SO3, and Al2(SO4)3 are much less corrosive. For sensitized AISI 304, thiosulfate levels in the range of 3 to 75 ppm cause pitting, 5 to 20 ppm S2O3= being particularly aggressive. Thiosulfate pitting occurred in the absence of chlorides when sulfate was present at SO4=:S2O3= molar ratios from 1.6 to 58. Compared to AISI 304, significantly greater resistance to thiosulfate pitting was found in AISI 316 and 317 L, Ferralium 255, and cast duplex SS, KCR-A171 and Alloy 75.Keywords
This publication has 4 references indexed in Scilit:
- Pitting of Stainless Alloys in Sulfate Solutions Containing Thiosulfate IonsCorrosion, 1985
- Effect of Thiosulfate on Crevice Corrosion of Stainless SteelsCorrosion, 1984
- Effects of Sulfur Compounds on the Pitting Behavior of Type 304 Stainless Steel in Near-Neutral Chloride SolutionsCorrosion, 1982
- Mechanism of decomposition of dithionite in aqueous solutionsCollection of Czechoslovak Chemical Communications, 1975