Compact Multiport MIMO Antenna System for 5G IoT and Cellular Handheld Applications
- 15 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (11) , 2136-2140
Abstract
A low-profile, compact, four-element, eight-port multiple-input--multiple-output and diversity antenna for 5G Internet of Things and cellular handheld applications is presented in this letter. This antenna structure contains four antenna elements, which are same in its configuration. The antenna ground dimensions are taken similar to a modern mobile handset, i.e., 60 mm × 120 mm. The four antenna elements are situated at four corners of antenna ground structure. Each antenna element has two feeding ports, thus making a total of eight-port antenna. A single antenna element has two feeding plates, which are placed perpendicular to one another so that they become cross polarized, thus exploiting polarization diversity, whereas spatial diversity also exists between different antenna elements. For reducing mutual coupling between different antenna ports, slots are cut in ground plane, including a small strip etched along the entire length of ground plane and rectangular slots cut in ground plane under every antenna element. The minimum bandwidth attained by all eight ports for S 11 < –10 dB is more than 1.4 GHz from 2.4 GHz to more than 3.8 GHz, which testify that it covers majority of frequency bands allocated for 5G sub-6 GHz spectrum. The isolation obtained between different ports has a minimum value of –13 dB, and the maximum value goes below –30 dB. For the covered frequency bands by this antenna structure, the correlation coefficient is found to be below 0.03, whereas the measured peak gain is in the range of 3.2--5 dB.Keywords
Funding Information
- Deanship of Scientific Research, King Saud University
- Islamic University of Madinah, Al-Madinah, Saudi Arabia (140/41-42)
This publication has 17 references indexed in Scilit:
- Current Misuses and Future Prospects for Printed Multiple-Input, Multiple-Output Antenna Systems [Wireless Corner]IEEE Antennas and Propagation Magazine, 2017
- 4G/5G Multiple Antennas for Future Multi-Mode Smartphone ApplicationsIEEE Access, 2016
- A Four-Port MIMO Antenna Using Concentric Square-Ring Patches Loaded With CSRR for High IsolationIEEE Antennas and Wireless Propagation Letters, 2015
- What Will 5G Be?IEEE Journal on Selected Areas in Communications, 2014
- A Compact Dual-Port Diversity Antenna for Long-Term Evolution Handheld DevicesIEEE Transactions on Vehicular Technology, 2009
- MIMO antenna system of two closely-positioned PIFAs with high isolationElectronics Letters, 2009
- Study and Reduction of the Mutual Coupling Between Two Mobile Phone PIFAs Operating in the DCS1800 and UMTS BandsIEEE Transactions on Antennas and Propagation, 2006
- Correlation and capacity of MIMO systems and mutual coupling, radiation efficiency, and diversity gain of their antennas: simulations and measurements in a reverberation chamberIEEE Communications Magazine, 2004
- Antenna-Pattern Diversity Versus Space Diversity for Use at HandheldsIEEE Transactions on Vehicular Technology, 2004
- Analysis for mean effective gain of mobile antennas in land mobile radio environmentsIEEE Transactions on Vehicular Technology, 1990