Feasibility of using seawater to produce ultra‐high ductile cementitious composite for construction without steel reinforcement
- 13 December 2018
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 20 (2) , 774-785
Abstract
Using seawater as mixing water to produce concrete may lead to excessive chloride content inside cementitious paste. This dramatically increases the risk of steel corrosion in the service life of RC structures. To address this issue, the authors tried to develop cementitious composites with sufficient ductility and strength, making it a structural material free from steel reinforcement, so that seawater can be used freely in mixture. In this article, ultra‐high ductile cementitious composites (UHDCC) were fabricated using 100% natural seawater, sea‐fresh water (50 + 50%) and 100% freshwater, in which the water‐soluble chloride contents reached 0.288, 0.181, and 0.073%, respectively. Mechanical test results indicated that the presence of chloride ions has negligible influence on the strength of single polyethylene fiber and fracture toughness of UHDCC matrix. Also, no significant difference was found existing in tensile strength, tensile strain capacity, and composite bridging capacity of the UHDCCs mixed with seawater or freshwater. Four‐point bending test demonstrated that plain UHDCC beams mixed with seawater, sea‐fresh water or freshwater have the similar load bearing capacity to a reference RC beam having steel reinforcement of 0.57%. Generally, the present experimental study demonstrates that chloride content has negligible influence on the mechanical properties of UHDCC, thus providing a solution for concrete constructions located in coastal areas and isolated islands.Keywords
Funding Information
- National Natural Science Foundation of China (5147836251778461)
This publication has 24 references indexed in Scilit:
- Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compressionEngineering Structures, 2018
- Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columnsThin-Walled Structures, 2016
- Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ashConstruction and Building Materials, 2014
- Time-dependent performance of concrete surface coatings in tidal zone of marine environmentConstruction and Building Materials, 2012
- Corrosion behaviour of new stainless steels reinforcing bars embedded in concreteCement and Concrete Research, 2007
- Performance of seawater-mixed concrete in the tidal environmentCement and Concrete Research, 2004
- Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniquesCement and Concrete Composites, 2003
- Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequencesConstruction and Building Materials, 1996
- Suitability of sea water for mixing structural concrete exposed to a marine environmentCement and Concrete Composites, 1995
- THE EFFECT OF SALT IN CONCRETE ON COMPRESSIVE STRENGTH, WATER VAPOR TRANSMISSION, AND CORROSION OF REINFORCING STEEL1962