Mechanical Properties and Morphology of Polylactide Composites with Acrylic Impact Modifier
Authors:
- 3 June 2011
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 50 (11) , 2070-2083
Abstract
Polylactide (PLA) composites with acrylic impact modifier BPM, i.e., PLA/BPM composites, were produced by the melt blending method. The effects of BPM on the thermal properties, melting behaviors, and dynamic mechanical properties of the PLA/BPMs were investigated by thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. Tensile strength, flexural strength, and modulus of the injection molded specimens were measured by an Instron tensile machine. The influence of BPM on the impact strength of injection molded PLA/BPM composites was examined using an impact tester. The morphology of cryofractured surfaces and fracture surfaces of the composites after the tensile and impact testing was also investigated using scanning electron microscope. The test results show that the composites with BPM possess better flexibility when compared with neat PLA. However, the notched Izod impact strength showed improvement only when the BPM content was higher than 15 wt%.Keywords
This publication has 28 references indexed in Scilit:
- Improvement of the Mechanical Properties of Biodegradable Hemp Fiber Reinforced Poly(lactic acid) (PLA) Composites by the Admixture of Man-made Cellulose FibersJournal of Composite Materials, 2009
- Mechanical and Thermal Properties of Green Polylactide Composites with Natural FillersMacromolecular Bioscience, 2008
- Modeling diameter distributions of poly(N‐isopropylacrylamide‐co‐methacrylic acid) nanoparticlesJournal of Applied Polymer Science, 2008
- Polylactide (PLA) and Highly Filled PLA ‐ Calcium Sulfate Composites with Improved Impact PropertiesMacromolecular Symposia, 2008
- Polylactide (PLA) designed with desired end‐use properties: 1. PLA compositions with low molecular weight ester‐like plasticizers and related performancesPolymers for Advanced Technologies, 2008
- Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane ElastomerMacromolecular Bioscience, 2007
- Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)Journal of Applied Polymer Science, 2005
- Grafting polymerization of l-lactide on the surface of hydroxyapatite nano-crystalsPolymer, 2004
- New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired propertiesPolymer, 2003
- New nanocomposite materials based on plasticized poly(l-lactide) and organo-modified montmorillonites: thermal and morphological studyPolymer, 2003