PMC Packaged Single-Substrate 4 × 4 Butler Matrix and Double-Ridge Gap Waveguide Horn Antenna Array for Multibeam Applications
- 16 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 248-261
Abstract
A perfect magnetic conductor (PMC) packaging concept is utilized at 30 GHz, which suppresses the higher order cavity modes, improves insertion losses, and helps in developing packaged microstrip lines (PMSLs) and double-ridge gap waveguide (DRGW) transmission lines. The Quasi-TEM PMSLs are used to design quadratic hybrid, crossover, and phase shifters as components of a wideband 4 x 4 Butler matrix (BM) on a single substrate. Two types of electromagnetic bandgap (EBG) unit cells--full height and half height--are investigated to realize artificial magnetic conductors (AMCs) required for the present design. A parametric study is performed for all components. BM is numerically assembled from these components and analyzed. It achieves a 5-GHz (28-33 GHz) bandwidth with return loss and isolation, both better than 15 dB. At 30 GHz, the insertion loss is 0.8 ± 0.3 dB, and antenna-ports' phase distributions are ±45° and ±135°. E-plane-flared horn antennas terminate the BM antenna ports as a linear array. The DRGW horn antenna is designed to reduce the scan loss within an array environment. The H-plane fan-beam switching covers ±42° with a maximum gain of 11.7 and 11.2 dBi for 1R and 2R beams, respectively. The H-plane element pattern and the half-height EBG AMC at the array aperture help to maintain 0.5 dB of gain loss for the outer beams (2R and 2L) compared to the inner beams (1R and 1L). The multibeam prototype is the right candidate for millimeter-wave 5G base station and can easily be scaled to higher frequency bands.Keywords
Funding Information
- Fonds de Recherche du Québec Nature et Technologies (B2X 260537)
This publication has 44 references indexed in Scilit:
- Packaged Microstrip Line: A New Quasi-TEM Line for Microwave and Millimeter-Wave ApplicationsIEEE Transactions on Microwave Theory and Techniques, 2016
- A Compact Branch-Line Coupler Using Substrate Integrated Suspended Line TechnologyIEEE Microwave and Wireless Components Letters, 2016
- Gap Waveguide-Based PMC Packaging for via Holes-Caused Nonsmooth PEC SurfaceIEEE Transactions on Components, Packaging and Manufacturing Technology, 2015
- Air-Filled Substrate Integrated Waveguide for Low-Loss and High Power-Handling Millimeter-Wave Substrate Integrated CircuitsIEEE Transactions on Microwave Theory and Techniques, 2015
- Broadband Substrate Integrated Waveguide 4$\,\times\,$4 Nolen Matrix Based on Coupler Delay CompensationIEEE Transactions on Microwave Theory and Techniques, 2011
- Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppressionIET Microwaves, Antennas & Propagation, 2011
- Broadband Butler matrix with flat couplingElectronics Letters, 2007
- The influence of a top cover on the leakage from microstrip lineIEEE Transactions on Microwave Theory and Techniques, 2000
- High-impedance electromagnetic surfaces with a forbidden frequency bandIEEE Transactions on Microwave Theory and Techniques, 1999
- Planar-circuit-type 3-dB quadrature hybridsIEEE Transactions on Microwave Theory and Techniques, 1994