Engineering thin 3D Li-composite foil negative electrodes with high mechanical toughness
Open Access
- 4 February 2026
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Abstract
Current three-dimensional lithium negative electrodes are plagued by inherent trade-offs among mechanical robustness, thin processability, and electrochemical performance. Here, we engineer a free-standing Li-composite foil negative electrodes by integrating a lithiophilic Li-Zn alloy with a Li 3 N-enriched carbon nanotube network. The Li-Zn alloy strengthens tensile resistance and regulates lithium deposition, while the Li 3 N-enriched carbon nanotube network reinforces mechanical toughness, achieving a rupture toughness of 1.3 × 10⁶ J/m³, a 12-fold enhancement over bare lithium. This property enables the fabrication of thin negative electrodes (500 cycles in coin cells at 1 C, 92% retention after 300 cycles in Ah-grade pouch cells at 0.5 C) and sustain high-rate operation (10 C). An 8.5 Ah pouch cell demonstrates a practical specific energy of 553 Wh kg −1 at cell level when tested at 0.1 C. This work presents a design strategy for realizing high-energy, long-cycle-life lithium metal batteries.Keywords
This publication has 64 references indexed in Scilit:
- Constructing Fast Ion/Electron Conducting Pathway within 3D Stable Scaffold for Dendrite‐Free Lithium Metal AnodeAdvanced Functional Materials, 2024
- A 3D Framework with an In Situ Generated Li3N Solid Electrolyte Interphase for Superior Lithium Metal BatteriesAdvanced Functional Materials, 2023
- Roll‐To‐Roll Fabrication of Zero‐Volume‐Expansion Lithium‐Composite Anodes to Realize High‐Energy‐Density Flexible and Stable Lithium‐Metal BatteriesAdvanced Materials, 2022
- A Rational Reconfiguration of Electrolyte for High‐Energy and Long‐Life Lithium–Chalcogen BatteriesAdvanced Materials, 2020
- A Lightweight 3D Cu Nanowire Network with Phosphidation Gradient as Current Collector for High‐Density Nucleation and Stable Deposition of LithiumAdvanced Materials, 2019
- Incorporating Flexibility into Stiffness: Self‐Grown Carbon Nanotubes in Melamine Sponges Enable A Lithium‐Metal‐Anode Capacity of 15 mA h cm−2 Cyclable at 15 mA cm−2Advanced Materials, 2018
- A Hierarchical Silver‐Nanowire–Graphene Host Enabling Ultrahigh Rates and Superior Long‐Term Cycling of Lithium‐Metal Composite AnodesAdvanced Materials, 2018
- Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal AnodeAdvanced Materials, 2017
- Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li–S BatteriesAdvanced Materials, 2016
- An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal AnodesAdvanced Materials, 2015