Adhesive performance of silver-palladium-copper-gold alloy and component metals bonded with organic sulfur-based priming agents and a tri-n-butylborane initiated luting material
- 30 January 2012
- journal article
- research article
- Published by Medical Journals Sweden AB in Acta Odontologica Scandinavica
- Vol. 71 (1) , 196-204
Abstract
Objective. The purpose of the current study was to evaluate the effect of thione-based metal priming agents on the adhesive behavior of a Ag-Pd-Cu-Au alloy and component metals bonded with an acrylic resin. Materials and methods. Disk specimens (10 mm in diameter by 3 mm thick) were prepared from a silver-palladium-copper-gold (Ag-Pd-Cu-Au) alloy (Castwell M. C. 12), high-purity silver, palladium, copper and gold. Four single-liquid priming agents containing organic sulfur compound (Alloy Primer, Metaltite, M. L. Primer and V-Primer) and three acidic priming agents (All Bond II Primer B, Estenia Opaque Primer and Super-Bond Liquid) were assessed. The metal specimens were flat-ground with abrasive papers, primed with one of the agents and bonded with a tri-n-butylborane initiated resin. The shear bond strengths were determined both before and after repeated thermocycling (5 degrees C and 55 degrees C, 1 min each, 20,000 cycles). The results were statistically analyzed with a non-parametric procedure (p = 0.05 level). Results. The post-thermocycling bond strengths in MPa (median; n = 11) associated with the Alloy Primer, Metaltite, M. L. Primer and V-Primer materials were, respectively, 20.8, 22.8, 17.8 and 18.4 for the Ag-Pd-Cu-Au alloy; 19.6, 21.9, 14.4 and 20.1 for silver; 5.4, 4.5, 12.8 and 5.3 for palladium; 17.1, 19.2, 0.7 and 6.6 for copper; and 18.5, 17.7, 22.8 and 15.4 for gold. Conclusions. It can be concluded that the use of the four priming agents, which are based on organic sulfur compounds, effectively enhanced bonding to the Ag-Pd-Cu-Au alloy and the component metals, although the bonding performance varied among the priming agents and metal elements. The priming agents appeared to have more of an effect on the alloy, silver and gold than on the palladium and copper.Keywords
This publication has 23 references indexed in Scilit:
- A nine-year clinical case study of a resin-bonded fixed partial denture seated on the maxillary anterior teethJournal of Prosthodontic Research, 2010
- The effect of primers on shear bond strength of acrylic resins to different types of metalsThe Journal of Prosthetic Dentistry, 2010
- Hydrogen Storage Mediated by Pd and Pt NanoparticlesChemphyschem, 2009
- Surface characterization of precious alloys treated with thione metal primersDental Materials, 2007
- Raman and IR studies on adsorption behavior of adhesive monomers in a metal primer for Au, Ag, Cu, and Cr surfacesJournal of Biomedical Materials Research, 2002
- Repair of an eight-unit fixed partial denture with a resin-bonded overcasting: A clinical reportThe Journal of Prosthetic Dentistry, 1996
- Study on triazine thiols. V. Polymerization of 6‐(4‐vinylbenzyl propyl) amino‐1,3,5‐triazine‐2,4‐dithiol on copper plates and their corrosion resistanceJournal of Polymer Science Part C: Polymer Letters, 1983
- The promotion of adhesion by the infiltration of monomers into tooth substratesJournal of Biomedical Materials Research, 1982
- 4-META Opaque Resin — A New Resin Strongly Adhesive to Nickel-Chromium AlloyJournal of Dental Research, 1981
- Development of adhesive pit and fissure sealants using a MMA resin initiated by a tri‐n‐butyl borane derivativeJournal of Biomedical Materials Research, 1978