Feasible Concept of an Air-Driven Fan with a Tip Turbine for a High-Bypass Propulsion System
Open Access
Abstract
The reduction in specific fuel consumption (SFC) is crucial for small/mid-size cost-controllable aircraft, which is very conducive to reducing cost and carbon dioxide emissions. To decrease the SFC, increasing the bypass ratio (BPR) is an important way. Conventional high-BPR engines have several limitations, especially the conflicting spool-speed requirements of a fan and a low-pressure turbine. This research proposes an air-driven fan with a tip turbine (ADFTT) as a potential device for a high-bypass propulsion system. Moreover, a possible application of this ADFTT is introduced. Thermodynamic analysis results show that an ADFTT can improve thrust from a prototype turbofan. As a demonstration, we selected a typical small-thrust turbofan as the prototype and applied the ADFTT concept to improve this model. Three-dimensional flow fields were numerically simulated through a Reynolds averaged Navier-Stokes (RANS)-based computational fluid dynamics (CFD) method. The performance of this ADFTT has the possibility of amplifying the BPR more than four times and increasing the thrust by approximately 84% in comparison with the prototype turbofan.Keywords
Funding Information
- National Natural Science Foundation of China (51176072)
This publication has 15 references indexed in Scilit:
- Aerodynamic design of an ultra-low rotating speed geared fanAerospace Science and Technology, 2017
- Design and aerodynamic analysis of a twin-engine commuter aircraftAerospace Science and Technology, 2015
- Ultra High Bypass Ratio Engine Sizing and Cycle Selection Study for a Subsonic Commercial Aircraft in the N+2 Timeframe2011
- The role and importance of UAV within the current theaters of operationsINCAS BULLETIN, 2010
- Fundamental Differences Between Conventional and Geared Turbofans2009
- A Tip-Turbine Driven Propulsion Fan Concept2002
- Axial flow compressor design†Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1999
- A report on the initial testing of the large scale advanced prop-fan1986
- Principles of TurbomachineryJournal of Pressure Vessel Technology, 1986
- DESIGN AND DEVELOPMENT OF THE TIP TURBINE LIFT FANAnnals of the New York Academy of Sciences, 1963