Antimony and bismuth passivations of InP and characterizations of InP metal-insulator-semiconductor structures fabricated by plasma oxidation of Sb- and Bi-passivated InP
Authors:
- 19 December 2002
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 21 (1) , 226-233
Abstract
The passivation effects of Sb and Bi on InP were investigated. Sb and Bi were vacuum-evaporated on the InP (100) substrates with their thicknesses being changed from 0 nm (not deposited) to about 10 nm and the Schottky current–density–voltage (J–V) characteristics were measured for evaluation of the extent of passivation. The J–V characteristics were substantially improved when the Sb and Bi layers with appropriate thicknesses (about 6 nm for Sb and 4 nm for Bi). The reverse leakage current density largely decreased (from about 10−2 A/cm2 for the native InP sample) to 4×10−5 and 10−7 A/cm2 for, respectively, the Sb(6 nm)/InP and Bi(4 nm)/InP samples. The Schottky barrier heights were as high as 0.59 and 0.75 eV for, respectively, the optimum Sb- and Bi-layer thicknesses, as compared with that (0.45 eV) for the native InP one, which suggested the partial removal of the strong Fermi level pinning at (EC-0.2) eV (EC: conduction band bottom). The J–V characteristics showed the ohmic behavior as the thicknesses of Sb and Bi were large (>8–10 nm). The secondary ion mass spectroscopic (SIMS) data suggested that the Au–Bi-alloy/Bi-terminated-InP structure was fabricated with the optimum Bi thickness, while the Au–Bi-alloy/metallic–Bi/InP structure was produced for the thicker Bi layers, leading to the ohmic behavior (or small Schottky barrier height) because of low work function of Bi. The case of Sb can similarly be considered. It was also shown by the x-ray photoelectron spectroscopic (XPS) data that Sb and Bi removed the native oxides of InP by their reductive natures. Finally, the Sb/InP and Al/Bi/InP structures were exposed to helicon-wave excited O2–Ar plasma to fabricate the Sb2O3/InP and Al2O3–Bi2O3/InP metal-insulator-semiconductor (MIS) structures, which showed relatively well capacitance-voltage (C-V) characteristics.Keywords
This publication has 21 references indexed in Scilit:
- Antimony Passivation of InPJapanese Journal of Applied Physics, 1993
- Large Schottky barrier heights on n-InP−A novel approachApplied Physics Letters, 1991
- Effect of annealing Sb/InP(110) interfaces and Schottky barrier formation of Ag on annealed Sb/InP(110) surfacesApplied Physics Letters, 1991
- One monolayer of Sb or Bi used as a buffer layer preventing oxidation of InPApplied Physics Letters, 1991
- Electrical properties of InPxOy -InP metal-insulator-semiconductor structuresJournal of Applied Physics, 1991
- High-barrier height metal-insulator-semiconductor diodes on n-InPJournal of Applied Physics, 1989
- Schottky and field-effect transistor fabrication on InP and GaInAsApplied Physics Letters, 1988
- Anodic oxidation of InP using a citric-acid-based solutionJournal of Applied Physics, 1988
- Reduction of the concentration of slow insulator states in SiO2/InP metal–insulator semiconductor structuresJournal of Vacuum Science & Technology B, 1987
- New and unified model for Schottky barrier and III–V insulator interface states formationJournal of Vacuum Science and Technology, 1979