Experimental Study on the Effect of Humidity on the Mechanical Properties of 3D-Printed Mechanical Metamaterials
Open Access
Abstract
In this study, six common fused filament fabrication (FFF) polymers—PEEK, PLA, PETG, ABS, Nylon, and TPU—were acclimatized at 15%, 45%, and 95% relative humidity (RH) to characterize tensile behavior, including Young’s modulus, maximum strain, and ultimate tensile strength. Separately, mechanical metamaterial samples at relative densities (RD) of 25%, 35%, and 45% were tested in compression at the same RH levels to evaluate stiffness, strength, and Poisson’s ratio. The water absorption process can generally be divided into different stages—rapid uptake (0–12 h), a plateau (12–60 h), and a late rebound (60–100 h)—with a total uptake ranking of Nylon > PETG > PLA ≈ ABS > TPU ≈ PEEK. Samples under tensile and compressive tests show a great difference between properties at different RD and RH levels. Poisson’s ratio indicates that material responses remain predictable at low-to-moderate RH, whereas high RH serves as a critical threshold inducing abrupt Poisson’s ratio behavioral shifts. This study provides systematic validation for the application of 3D-printed metamaterials under varying humidity conditions, such as biomedical implants in human body.Keywords
Funding Information
- Carl-Zeiss-Stiftung “Grundlagenforschung mit Anwendungsbezug”
- Deutsche Forschungsgemeinschaft (515116761, EXC-2193/1–390951807)
- Alexander von Humboldt-Stiftung
- National Natural Science Foundation of China (12302190)
- Fundamental Research Funds for the Central Universities (G2022WD01028, G2024KY05105)
- Science Foundation of the National Key Laboratory of Science and Technology on Advanced Composites in Special Environments (JCKYS2023603C018)
This publication has 57 references indexed in Scilit:
- PEEK ‐Based Orthopedic Composites and Structures for Orthopedic Repair: A ReviewPolymer Composites, 2025
- Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturingThe International Journal of Advanced Manufacturing Technology, 2024
- 3D‐Printed Mechanical Metamaterials with High Energy AbsorptionAdvanced Materials Technologies, 2018
- Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain SensorsAdvanced Materials, 2018
- Patient Specific Implants from a 3D Printer – An Innovative Manufacturing Process for Custom PEEK Implants in Cranio-Maxillofacial Surgery2017
- Auxetic Foam‐Based Contact‐Mode Triboelectric Nanogenerator with Highly Sensitive Self‐Powered Strain Sensing Capabilities to Monitor Human Body MovementAdvanced Functional Materials, 2017
- Double‐Negative Mechanical Metamaterials Displaying Simultaneous Negative Stiffness and Negative Poisson's Ratio PropertiesAdvanced Materials, 2016
- Auxetic Materials: Functional Materials and Structures from Lateral Thinking!Advanced Materials, 2000
- Advances in negative Poisson's ratio materialsAdvanced Materials, 1993
- Effects of moisture on thermal and mechanical properties of nylon‐6,6Advances in Polymer Technology, 1989