Improvement of Mass Transfer Characteristics for the Gas-Liquid System in a Vortex Counterflow Apparatus
Open Access
Abstract
This article aims to increase the intensity of mass transfer between gas and liquid in counterflow gas–liquid flow, one of the key problems in designing mass transfer equipment. For this purpose, analytical and experimental studies were carried out to evaluate the main features of operating processes in a vortex counterflow apparatus. In particular, the presented research substantiates the possibility of achieving several theoretical stages of concentration change in a single atomizing stage of the vortex counterflow mass transfer apparatus. The corresponding experimental stand was developed to carry out experimental studies. Afterward, the efficiency of the vortex counterflow mass transfer apparatus was evaluated. The model was based on material balance and flow rate equations, allowing for the determination of mass transfer and intensity ratio. After comparing the analytical expressions with the experimental results, the regression dependence for evaluating the main parameter of the proposed mathematical model was obtained. An increase in steam consumption led to increased steam velocities, affecting the droplets. This fact proved an increase in the intensity of mass transfer processes. The studies substantiated the achievement of several theoretical stages of concentration change and increased the efficiency of a vortex counterflow mass transfer apparatus. From a practical viewpoint, the experimental studies confirmed that when the height and radius ratio is less than 0.6–0.7, it is possible to create a plane vortex countercurrent motion of gas and liquid flows with a significant increase in peripheral gas velocities along the radius of the vortex chamber.Keywords
Funding Information
- Ministry of Science and High Education of Poland
This publication has 23 references indexed in Scilit:
- Gas–liquid and liquid–liquid vortex technology for process intensificationCurrent Opinion in Chemical Engineering, 2024
- Dynamic behaviors of multiphase vortex-induced vibration for hydropower energy conversionEnergy, 2024
- Experimental study of gas–liquid behavior in three-flow vortex tube with sintered metal porous material as the drain partEnergy, 2022
- Reconciling thermal performance and power-saving performance of counter-flow spray heating towersEnergy Reports, 2021
- Intensification of mass transfer processes through the impact of the velocity gradient on hydrodynamics and stability of liquid droplets in a gas flowChemical Engineering Science, 2021
- Two-phase flow and mass transfer in microchannels: A review from local mechanism to global modelsChemical Engineering Science, 2021
- Mathematical Modeling of Dynamic Heat-Mass Exchange Processes for a Spray-Type Humidifier2020
- Performance analysis of a vortex chamber under non-reacting and reacting conditionsSādhanā, 2020
- Comparative investigation of liquid film thickness and interfacial wave properties of swirling gas-liquid flowsChemical Engineering Science, 2020
- Internal droplet circulation induced by surface-driven rotationInternational Journal of Heat and Fluid Flow, 1994