Etching parylene-N using a remote oxygen microwave plasma
Authors:
- 1 September 2002
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 20 (5) , 1870-1877
Abstract
The etching characteristics of parylene-N in a remote microwave oxygen plasma have been studied. The etch rate was measured over a range of pressures from 0.4 to 2.0 Torr and oxygen flow rates from 25 to 125 sccm using an applied plasma power of 250 W. In order to describe the etching behavior of the polymer as a function of different process parameters, a model has been developed to predict the concentration of reactive species at the polymer surface. The model uses two different plasma physics models to predict the net molecular oxygen dissociation rate in the microwave plasma. The species concentrations at the plasma outlet are used as the inlet condition for a model of the afterglow region, which includes a delivery tube and an etching chamber. The afterglow region is modeled using momentum and mass conservation equations. The predicted atomic oxygen concentrations at the polymer surface are inserted into a simple etch rate model and an etch rate is calculated and compared to etch rate data. The best agreement between theory and experiment was found using a plasma physics model developed by the Joint Institute for Laboratory Astrophysics and an etch rate model that has a reaction order of 0.5 with respect to the oxygen atom concentration.Keywords
This publication has 10 references indexed in Scilit:
- Effects of gas pressure and substrate temperature on the etching of parylene-N using a remote microwave oxygen plasmaJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2001
- Photoresist stripping in afterglow of Ar-O2 microwave plasmaJournal of Applied Physics, 1994
- Transport model of charged particle behavior in the afterglow region of a microwave generated oxygen plasmaJournal of Applied Physics, 1993
- Electron-impact dissociation of oxygenThe Journal of Chemical Physics, 1993
- Detailed model of the afterglow region of a microwave generated oxygen plasmaJournal of Applied Physics, 1992
- A mathematical model for a plasma-assisted downstream etching reactorJournal of Applied Physics, 1989
- Dissociation of oxygen in a radiofrequency electrical dischargeAIChE Journal, 1972
- Zum Mechanismus der homogenen positiven Säule der Sauerstoff‐NiederdruckentladungContributions to Plasma Physics, 1971
- Analysis of electron swarm experiments in oxygenJournal of Physics B: Atomic and Molecular Physics, 1969
- Momentum-Transfer and Inelastic-Collision Cross Sections for Electrons in, CO, and CPhysical Review B, 1967