Gate architecture design for enhancement mode p-GaN gate HEMTs for 200 and 650V applications
Authors:
- 1 May 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 188-191
Abstract
Enhancement mode p-GaN gate HEMTs with two different gate architectures are compared. The gate is realized by stacked (1-mask) or separate patterning (3-mask) of the p-GaN and gate metal layers. The 3-mask gate architecture, in this work implemented with a novel TiN interlayer, offers the advantage of a low gate resistance, increased flexibility in field plate design and reduced dynamic RDS-ON at high VDS. Both for 200 and 650 V applications excellent device performance is demonstrated on 200 mm substrates using Au-free processing, with a threshold voltage of well above 2 V and a dynamic R DS-ON of below 20%. The 650 V rated device, with a hard breakdown voltage of 1000 V, passes the wafer level HTRB test at 150 °C.Keywords
This publication has 6 references indexed in Scilit:
- Effective 3-D Device Electrothermal Simulation Analysis of Influence of Metallization Geometry on Multifinger Power HEMTs PropertiesIEEE Transactions on Electron Devices, 2016
- Through recessed and regrowth gate technology for realizing process stability of GaN-GITs2016
- Impact of Mg out-diffusion and activation on the p-GaN gate HEMT device performance2016
- Normally-off GaN Transistors for Power ApplicationsJournal of Physics: Conference Series, 2014
- An Efficient High-Frequency Drive Circuit for GaN Power HFETsIEEE Transactions on Industry Applications, 2009
- Gate Injection Transistor (GIT)—A Normally-Off AlGaN/GaN Power Transistor Using Conductivity ModulationIEEE Transactions on Electron Devices, 2007