A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars
Open Access
- 10 February 2021
- journal article
- research article
- Published by Springer Nature in SN Applied Sciences
- Vol. 3 (3) , 1-14
Abstract
This study explains a coherent flow for designing, manufacturing, analyzing, and testing a tunable anti-roll bar system for a formula student racecar. The design process starts with the analytical calculation for roll stiffness using constraining parameters such as CG (Center of Gravity) height, total mass, and weight distribution in conjunction with suspension geometry. Then, the material selection for the design i.e. Aluminum 7075 T6 is made based on parameters such as density and modulus of rigidity. A MATLAB program is used to iterate deflection vs load for different stiffness and shaft diameter values. This is then checked with kinematic deflection values in Solidworks geometry. To validate with the material deflection, finite element analysis is performed on ANSYS workbench. Manufacturing accuracy for the job is checked using both static analysis in lab settings and using sensors on vehicles during on-track testing. The error percentage is found to be 4% between the target stiffness and the one obtained from static testing. Parameters such as moment arm length, shaft diameter and length, and deflection were determined and validated. This paper shows the importance of an anti-roll bar device to tune the roll stiffness of the car without interfering with the ride stiffness.Keywords
This publication has 15 references indexed in Scilit:
- Optimization of suspension system and sensitivity analysis for improvement of stability in a midsize heavy vehicleEngineering Science and Technology, an International Journal, 2017
- Integrated Model-In-Loop (MiL) Simulation Approach to Validate Active Roll Control SystemSAE International Journal of Advances and Current Practices in Mobility, 2017
- Experimental Investigation of Interconnected Hydraulic Suspensions with Different Configurations to Soften Warp Mode for Improving Off-Road Vehicle TrafficabilitySAE International Journal of Advances and Current Practices in Mobility, 2015
- Vehicle Dynamics2014
- Application of Finite Element Method in the Study of Variables that Influence the Stiffness of the Anti-Roll Bar and the Body RollSAE International Journal of Advances and Current Practices in Mobility, 2013
- Experimental Comparison of Anti-Roll Bar with Hydraulically Interconnected Suspension in Articulation ModeSAE International Journal of Advances and Current Practices in Mobility, 2013
- Engineering Design, Planning, and Management2013
- Study on Modeling Method of Anti-roll Bar Using One Dimensional Beam ElementSAE International Journal of Advances and Current Practices in Mobility, 2009
- Anti-Roll Stability Suspension TechnologySAE International Journal of Advances and Current Practices in Mobility, 2005
- Fundamentals of Vehicle Dynamics1992