Mechanical Properties of Composite Materials from Waste Poly(ethylene terephthalate) Reinforced with Glass Fibers and Waste Window Glass
Open Access
- 29 September 2021
- journal article
- research article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2021, 1-14
Abstract
After primary uses of the plastic product, most developing countries like Ethiopia are facing a shortage of postconsumer disposal waste sites and it became a very serious problem on environmental pollution due to its nonbiodegradable nature. For this reason, regenerating and using the waste product as resources and reducing environmental pollutions are a great opportunity. This research is aimed at the manufacturing of composite materials from waste poly(ethylene terephthalate) (PET) bottles reinforced with glass fibers and filled with waste glass powder for floor tile applications. The tile composites were prepared by the melt-mixing method followed by compression molding. The effect of filler, fiber, and PET matrix loading on the composite was investigated using their tensile, compression, and flexural strength tests. The sample was characterized using a universal testing machine. PerkinElmer FTIR instrument was also used. For this, eleven samples prepared by varying the glass fiber weight % from 0 to 10, PET matrix weight % from 70 to 85, and glass powder filler weight % from 5 to 20. The measurement results of the composite were maximum tensile strength (81.625 MPa) and flexural strength (1067.59 MPa) recorded at 10%weight of glass fiber, 85% weight of PET matrix, and 5%weight of window glass filler. The maximum compressive strength is 1876.14 MPa at 10% weight glass fiber, 70 wt% PET matrix, and 20 wt% window glass filler. Based on this, the tensile strength and flexural strength increased with increased weight % of glass fiber and decreased with increased window glass filler. The FTIR spectrum shows some of the groups that have been removed from the recycled PET; this explains the brittleness of the recycled PET as compared to the waste bottle PET. The microstructure was uniformly distributed, and the material became opaque, probably because the decrease in chain length improves chain packing, increasing the crystallinity degree and crystal size.Keywords
This publication has 20 references indexed in Scilit:
- Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concreteCogent Engineering, 2016
- Robust Identification of Polyethylene Terephthalate (PET) Plastics through Bayesian DecisionPLOS ONE, 2014
- Recycling of Polymers: A ReviewChemSusChem, 2014
- Glass fiber-reinforced polymer composites – a reviewJournal of Reinforced Plastics and Composites, 2014
- Composites of Recycled PET Reinforced with Short Glass FiberJournal of Thermoplastic Composite Materials, 2011
- Effect of fiber length and fiber content on mechanical properties of banana fiber/epoxy compositeJournal of Reinforced Plastics and Composites, 2011
- Cellulosic/synthetic fibre reinforced polymer hybrid composites: A reviewCarbohydrate Polymers, 2011
- Effect of recycled PET in the fracture mechanics of polymer mortarConstruction and Building Materials, 2011
- Plastics recycling: challenges and opportunitiesPhilosophical Transactions of the Royal Society B: Biological Sciences, 2009
- Short pineapple‐leaf‐fiber‐reinforced low‐density polyethylene compositesJournal of Applied Polymer Science, 1995