Simultaneous arm morphing quadcopter and autonomous flight system design
Authors:
- 22 September 2023
- journal article
- research article
- Published by Emerald Publishing in Aircraft Engineering and Aerospace Technology
- Vol. 95 (10) , 1624-1632
Abstract
Purpose: The purpose of this paper is to obtain values that stabilize the lateral and longitudinal flight of the quadrotor for which the morphing amount and the best Proportional-Integral-Derivative (PID) coefficients are determined by using the simultaneous perturbation stochastic approximation (SPSA) optimization algorithm. Design/methodology/approach: Quadrotor consists of body and arms; there are propellers at the ends of the arms to take off and rotors that rotate them. By reducing the angle between mechanism 1 and the rotors with the horizontal plane, the angle between mechanism 2 and the arms, the rotors rise and different configurations are obtained. Conventional multi-rotor aircraft has a fixed fuselage and does not need a tail rotor to change course as helicopters do. The translational and rotational movements are provided by the rotation of the rotors of the aircraft at different speeds by creating moments about the geometric center in 6-degree-of-freedom (DOF) space. These commands sent from the ground are provided by the flight control board in the aircraft. The longitudinal and lateral flight stability and properties of different configurations evaluated by dynamic analysis and simulations in 6 DOF spaces are investigated. An algorithm and PID controller are being developed using SPSA to achieve in-flight position and attitude control of an active deformable aircraft. The results are compared with the results of the literature review and the results of the previous article. Findings: With SPSA, the best PID coefficients were obtained in case of morphing. Research limitations/implications: The effects of quadrotor arm height and hub angle changes affect flight stability. With the SPSA optimization method presented in this study, the attitude is quickly stabilized. Practical implications: With the optimization method, the most suitable PID coefficients and angle values for the lateral and longitudinal flight stability of the quadrotor are obtained. Social implications: The transition rate and PID coefficients are determined by using the optimization method, which is advantageous in terms of cost and practicality. Originality/value: With the proposed method, the aircraft can change shape to adapt to different environments, and the parameters required for more stable flight for each situation will be calculated, and this will be obtained more quickly and safely with the SPSA optimization method.Keywords
This publication has 23 references indexed in Scilit:
- Evaluation of a Baseline Controller for Autonomous “Figure-8” Flights of a Morphing Geometry Quadcopter: Flight PerformanceDrones, 2019
- Optimization of PID Controller Based on Water Wave Optimization for an Automatic Voltage Regulator SystemInformation Technology And Control, 2019
- Simultaneous Design of a Small UAV (Unmanned Aerial Vehicle) Flight Control System and Lateral State Space ModelJournal of Aviation, 2018
- The Foldable Drone: A Morphing Quadrotor That Can Squeeze and FlyIEEE Robotics and Automation Letters, 2018
- Implementation of open-architecture kinematic controller for articulated robots under ROSIndustrial Robot: the international journal of robotics research and application, 2018
- Quadrotor model with proportional derivative controller2017
- PID BASED HIERARCHICAL AUTONOMOUS SYSTEM PERFORMANCE MAXIMIZATION OF A HYBRID UNMANNED AERIAL VEHICLE (HUAV)Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering, 2017
- Quadrotor modelling and control2016
- Combined passive and active helicopter main rotor morphing for helicopter energy saveJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
- Robust Neural Network Tracking Controller Using Simultaneous Perturbation Stochastic ApproximationIEEE Transactions on Neural Networks, 2008