A Real Time NOx Model for Conventional and Partially Premixed Diesel Combustion
Authors:
- 3 April 2006
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In this paper a fast NOx model is presented which can be used for engine optimization, aftertreatment control or virtual mapping. A cylinder pressure trace is required as input data. High calculation speed is obtained by using table interpolation to calculate equilibrium temperatures and species concentrations. Test data from a single-cylinder engine and from a complete six-cylinder engine have been used for calibration and validation of the model. The model produces results of good agreement with emission measurements using approximately 50 combustion product zones and a calculation time of one second per engine cycle. Different compression ratios, EGR rates, injection timing, inlet pressures etc. were used in the validation tests. The model calculates thermal (high-temperature) NOx formation by the two reactions of the original Zeldovich mechanism but by using a simple empirical compensation algorithm, the model can also be used for low-temperature NOx formation associated with high EGR rates and long ignition delay.Keywords
This publication has 5 references indexed in Scilit:
- NOx and N2O formation in HCCI enginesSAE International Journal of Advances and Current Practices in Mobility, 2005
- Dynamic Model-Based Calibration Optimization: An Introduction and Application to Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2005
- Premixed Compression Ignition (PCI) Combustion for Simultaneous Reduction of NOx and Soot in Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2004
- Kinetic Modelling of Gaseous Emissions in a Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2000
- 2-Zonen Rechenmodell zur Vorausrechnung der NO-Emission von DieselmotorenMTZ - Motortechnische Zeitschrift, 1998