Fabrication of La1 –xSrxCoO3 –δthin layers on porous supports by a polymeric sol–gel process
Authors:
- Chunhua ChenCCChunhua Chen
- Henny J. M. BouwmeesterHBHenny J. M. Bouwmeester
- Henk KruidhofHKHenk Kruidhof
- Johan E. Ten ElshofJohan E. Ten Elshof
- Anthony J. BurggraafABAnthony J. Burggraaf
- 1 January 1996
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 6 (5) , 815-819
Abstract
A polymeric sol–gel process was developed to fabricate porous thin layers of the perovskite-type La0.3Sr0.7CoO3 –δ for membrane applications. A spin-coating technique was used for deposition of the layer on porous α-and γ-Al2O3 supports. Both supported and non-supported membranes were characterized by means of thermal analysis, X-ray powder diffraction, particle size analysis, scanning electron microscopy and permporometry. The main phase formed upon heating in air above 400 °C is cubic perovskite, although traces of SrCO3 and of an unknown phase can be observed up to 800 °C. Above this temperature, strong chemical interaction occurs between the deposited perovskite layer and the support material. The effects of the sintering temperature and the type of the La-precursor on the pore-size distribution were investigated.Keywords
This publication has 17 references indexed in Scilit:
- Microporous inorganic membranes: Preparation, characterization and separation propertiesAdvanced Materials, 1993
- Pore Narrowing and Formation of Ultrathin Yttria‐Stabilized Zirconia Layers in Ceramic Membranes by Chemical Vapor Deposition/Electrochemical Vapor DepositionJournal of the American Ceramic Society, 1993
- Permporometry study on the size distribution of active pores in porous ceramic membranesJournal of Membrane Science, 1993
- Processing Effects in the Sol–Gel Preparation of PZT Dried Gels, Powders, and Ferroelectric Thin LayersJournal of the American Ceramic Society, 1992
- Thin-film ceramic electrolytes deposited on porous and non-porous substrates by sol-gel techniquesSolid State Ionics, 1992
- CVD of solid oxides in porous substrates for ceramic membrane modificationAIChE Journal, 1992
- Influence of constituent metal cations in substituted LaCoO3 on mixed conductivity and oxygen permeabilitySolid State Ionics, 1991
- Preparation of Pb(Mg1/3Nb2/3)O3 Thin Film by Sol-Gel MethodJapanese Journal of Applied Physics, 1989
- Sol-gel processing of Y1Ba2Cu3O7−x using alkoxide precursors: Two systems yielding high degrees of thin film orientation and crystal growthMaterials Letters, 1989
- Perovskite-type oxides as oxygen electrodes for high temperature oxide fuel cellsSolid State Ionics, 1987