Investigation of Failure Behavior in the Thread Contact of Wood Screws during the Pull-Out Process
- 1 October 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 146 (10) , 04020211
Abstract
For optimizing wood screws, it is necessary to understand the failure behavior as well as the effect of screw parameters in the thread contact on the withdrawal capacity. The aim of this paper is to investigate the failure behavior of self-tapping wood screws in spruce wood [picea abies (L.)] during the pull-out process. Because this is possible with existing methods to a certain extent only, two analysis techniques used for investigations of chemical anchoring are adapted. The experiments are carried out using five self-tapping wood screws with an outer diameter of 6 mm. The results show that the screw movement observed during the pull-out process is much smaller than the displacement measured by pull-out machines for certification purposes. Another observation is that the failure behavior of different screw types varies with regard to crack formation. Improved understanding of failure behavior will allow for an in-depth investigation of the influence of screw parameters and, hence, for the design of improved wood screws.Keywords
This publication has 14 references indexed in Scilit:
- Axial beanspruchte Holzschrauben in Vollholz, Brettschichtholz und BrettsperrholzBautechnik, 2015
- Simulation of transverse wood compression using a large-deformation, hyperelastic–plastic material modelWood Science and Technology, 2014
- Strength of timber connections under potential failure modes: An improved design procedureConstruction and Building Materials, 2014
- Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber productsMaterials and Structures, 2013
- Bending Properties of Wood I-Sections Fabricated with Screws and Polyurethane AdhesiveJournal of Structural Engineering, 2013
- Numerical Modeling of the Failure Behavior of Dowel Connections in WoodJournal of Engineering Mechanics, 2011
- A simple unified model for withdrawal of lag screws and glued-in rodsEuropean Journal of Wood and Wood Products, 2010
- Modelle für die Berechnung der Ausziehtragfähigkeit von selbstbohrenden HolzschraubenEuropean Journal of Wood and Wood Products, 2009
- The nanostructure of the cell wall of softwoods and its functions in a living treeEuropean Journal of Wood and Wood Products, 1998
- Fracture Initiation and Progress in Wood Specimens Stressed in Tension. Part I. Clear Wood Specimens Stressed Parallel to the GrainHolzforschung, 1997