Compensation analysis of longitudinal end effect in three‐phase switched reluctance linear machines
Open Access
- 18 December 2019
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 14 (2) , 165-174
Abstract
The longitudinal end effect of switched reluctance linear machine (SRLM) makes the electromagnetic characteristics of different phases unbalanced, especially in magnetic flux distributions. These discrepancies unbalance phase currents and aggravate the force ripple of SRLM, which are verified on a double‐sided SRLM. This study aims to analyse the influence of the longitudinal end effect on SRLMs and to investigate simple but practical compensation methods for the performance improvement of linear machines. Through magnetic circuit analysis, a new compensation method which is widening stator end poles is proposed for the first time. Three‐dimensional finite element analysis (3D FEA) shows that this new method can decrease the force factor by about 93.9%, while the previously used method which is adding auxiliary stator poles can decrease the force ripple factor by only about 27.5%. In addition, the proposed method needs less extra space than the previous method. Hence, the new compensation method is more practical and more efficient. Furthermore, the theoretical value of optimal width of stator end poles is expressed, and its effectiveness is confirmed by sensitivity analysis.Keywords
This publication has 27 references indexed in Scilit:
- Performance Analysis of a Mutually Coupled Linear Switched Reluctance Machine for Direct-Drive Wave Energy ConversionsIEEE Transactions on Magnetics, 2017
- Force ripple and jerk minimisation in double sided linear switched reluctance motor used in elevator applicationIET Electric Power Applications, 2016
- Distributed Coordinated Motion Tracking of the Linear Switched Reluctance Machine-Based Group Control SystemIEEE Transactions on Industrial Electronics, 2015
- Optimization Design of the Planar Switched Reluctance Motor on Electromagnetic Force Ripple MinimizationIEEE Transactions on Magnetics, 2014
- A Method to Segregate Detent Force Components in Permanent-Magnet Flux-Switching Linear MachinesIEEE Transactions on Magnetics, 2011
- Fast Analytical Determination of Aligned and Unaligned Flux Linkage in Switched Reluctance Motors Based on a Magnetic Circuit ModelIEEE Transactions on Magnetics, 2009
- Investigation of Auxiliary Poles Design Criteria on Reduction of End Effect of Detent Force for PMLSMIEEE Transactions on Magnetics, 2009
- Reduction of the Cogging Force at the Outlet Edge of a Stationary Discontinuous Primary Linear Synchronous MotorIEEE Transactions on Magnetics, 2006
- Design of a linear switched reluctance machineIEEE Transactions on Industry Applications, 2000
- Two-dimensional finite-element analysis of a high-force-density linear switched reluctance machine including three-dimensional effectsIEEE Transactions on Industry Applications, 2000