Enhancing Brake System Evaluation in Periodic Testing of Goods Transport Vehicles through FTA-FMEA Risk Analysis
Authors:
- Irfan AnsoriIAIrfan Ansori
- Dwitya Harits WaskitoDwitya Harits Waskito
- Mutharuddin MutharuddinMMMutharuddin Mutharuddin
- Novi IrawatiNINovi Irawati
- Sinung NugrohoSNSinung Nugroho
- Tetty Sulastri MardianaTetty Sulastri Mardiana
- Subaryata SubaryataSSSubaryata Subaryata
- Nurul Aldha Mauliddina SiregarNSNurul Aldha Mauliddina Siregar
Open Access
- 18 May 2023
- journal article
- research article
- Published by Universitas Muhammadiyah Magelang in Automotive Experiences
- Vol. 6 (2) , 320-335
Abstract
Failure of the braking system is one of the factors causing traffic accidents, therefore periodic testing of goods transport vehicles is very important. In fact, the incidence rate is still very high despite routine testing. Standard Operating Procedures (SOP) for periodic testing must be updated to reduce the risk of possible accidents. Therefore, procedures for updating the SOP for periodic brake system testing are presented in this article. The Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) methods were applied based on accident investigation data from the National Transportation Safety Committee (NTSC) from 2017 to 2022. FTA is used for risk identification, while FMEA is used for risk analysis to find the highest-risk failure cases. The results of our analysis showed that 13 failure cases were classified as intolerable so additional SOPs were required for each case. Finally, the results of this study provide new insights for stakeholders to revise the rules regarding periodic vehicle testing.Keywords
This publication has 29 references indexed in Scilit:
- Risk analysis of collision accidents during underway STS berthing maneuver through integrating fault tree analysis (FTA) into Bayesian network (BN)Applied Ocean Research, 2022
- Fire risk assessment of battery transportation and storage by combining fault tree analysis and fuzzy logicJournal of Loss Prevention in the Process Industries, 2022
- Modified FMEA hazard identification for cross-country petroleum pipeline using Fuzzy Rule Base and approximate reasoningJournal of Loss Prevention in the Process Industries, 2022
- RISK ANALYSIS OF GROUNDING ACCIDENTS BY MAPPING A FAULT TREE INTO A BAYESIAN NETWORKApplied Ocean Research, 2021
- Risk Analysis of Equipment Failure through Failure Mode and Effect Analysis and Fault Tree AnalysisJournal of Failure Analysis and Prevention, 2021
- Risk analysis for occupational safety and health in the textile industry: Integration of FMEA, FTA, and BIFPET methodsInternational Journal of Industrial Ergonomics, 2019
- Risk assessment of process systems by mapping fault tree into artificial neural networkJournal of Loss Prevention in the Process Industries, 2019
- FTA-FMEA-based validity verification techniques for safety standardsKorean Journal of Chemical Engineering, 2017
- Failure Mode and Effect Analysis, and Fault Tree Analysis of Polymer Electrolyte Membrane Fuel CellsInternational Journal of Hydrogen Energy, 2016
- Fuzzy fault tree analysis for patient safety risk modeling in healthcare under uncertaintyApplied Soft Computing, 2015