Atom Probe Tomography of Carbides in Fe‐Cr‐(W)‐C Steels
- 15 May 2019
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 90 (8)
Abstract
In this study, Fe‐Cr‐C and Fe‐Cr‐W‐C alloys are characterized using atom probe tomography. The alloys have been heat treated at 1070 °C for 30 min and subsequently at 780 °C for various time periods. Carbide formation is observed at each state. Cr‐C precipitates smaller than 5 nm in radius for short heat treatment times and larger than 50 nm for heat‐treatment times greater than 1000 s are observed. It is found that the phase interface moves during the first time period at an almost constant speed. Later on the velocity of the phase interface decreases. Furthermore, kinetic assumptions for carbide growth from a previous theoretical study have been verified. As expected, a decrease of the microhardness with increasing aging time is detected which is caused by martensite tempering. The aim of this study is to measure the change in chemical compositions across phase interfaces between matrix and precipitates to obtain a better understanding of the precipitation process.Keywords
Funding Information
- UK EPSRC Project grants (EP/M022803/1 EP/P001645/1)
This publication has 17 references indexed in Scilit:
- Atom Probe Microscopy2012
- Static recovery of tempered lath martensite microstructures during long-term aging in 9–12% Cr heat resistant steelsMaterials Letters, 2009
- Design of martensitic/ferritic heat-resistant steels for application at 650°C with supporting thermodynamic modellingMaterials Science and Engineering: A, 2008
- Simulation of the kinetics of precipitation reactions in ferritic steelsActa Materialia, 2005
- Visualization of subgrain structure for a ferritic 12Cr–2W steel using backscattered scanning electron microscopyMaterials Letters, 2004
- Martensitic/Ferritic Super Heat-resistant 650.DEG.C. Steels. Design and Testing of Model Alloys.ISIJ International, 2002
- Complex carbide growth, dissolution, and coarsening in a modified 12 pct chromium steel—an experimental and theoretical studyMetallurgical and Materials Transactions A, 2001
- Carbide formation mechanism during solidification and annealing of 17% Cr-ferritic steelMaterials Letters, 2000
- Heat treatment, aging effects, and microstructure of 12 Pct Cr steelsJournal of Heat Treating, 1984
- Microstructure and Creep Rupture Properties of a Low Si-12Cr-Mo-V-Nb SteelTransactions of the Iron and Steel Institute of Japan, 1980