24.1 A 24-to-30GHz Watt-Level Broadband Linear Doherty Power Amplifier with Multi-Primary Distributed-Active-Transformer Power-Combining Supporting 5G NR FR2 64-QAM with >19dBm Average Pout and >19% Average PAE
Authors:
- 1 February 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 362-364
Abstract
The continuous worldwide demand for multi-Gb/s data-rate has driven the rapid development and standardization of 5G New Radio (NR) specifications in the mmwave bands [1]–[3]. As a result, there is a surge of interest in high-performance yet compact mm-wave 5G front-end chipsets to enable large-aperture phased arrays. In User Equipment (UE) devices, the limited form factor restricts the number of antenna array elements, e.g., 2×2, which dramatically increases the output power $(\mathrm{P}_{\mathrm{out}})$ requirement per element [1], [4]. For base stations, although some applications require only moderate element $\mathrm{P}_{\mathrm{out}}$ and high antenna gain, high $\mathrm{P}_{\mathrm{out}}$ capabilities allow array-divisions/sub-arrays for concurrent multi-stream mmwave links.
Keywords
This publication has 6 references indexed in Scilit:
- A 26 dBm 39 GHz Power Amplifier with 26.6% PAE for 5G Applications in 28nm bulk CMOS2019
- 4.9 A 60GHz CMOS Power Amplifier with Cascaded Asymmetric Distributed-Active-Transformer Achieving Watt-Level Peak Output Power with 20.8% PAE and Supporting 2Gsym/s 64-QAM Modulation2019
- 4.8 A Highly Linear Super-Resolution Mixed-Signal Doherty Power Amplifier for High-Efficiency mm-Wave 5G Multi-Gb/s Communications2019
- 2.7 A wideband 28GHz power amplifier supporting 8×100MHz carrier aggregation for 5G in 40nm CMOS2017
- 2.9 A 29dBm 18.5% peak PAE mm-Wave digital power amplifier with dynamic load modulation2015
- Large-Scale Power Combining and Mixed-Signal Linearizing Architectures for Watt-Class mmWave CMOS Power AmplifiersIEEE Transactions on Microwave Theory and Techniques, 2015