Effects of dynamic elongational flow on the dispersion and mechanical properties of low‐density polyethylene/nanoprecipitated calcium carbonate composites
Authors:
- 31 October 2013
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 35 (5) , 884-891
Abstract
Low‐density polyethylene (LDPE)/nanoprecipitated calcium carbonate (NPCC) nanocomposites were prepared with a self‐made vane extruder (VE) that generates global dynamic elongational flow and with a single‐screw extruder (SSE) that generates low shear flow. The mechanical properties, dispersed phase morphology, and thermal behavior of the nanocomposites were investigated to compare the different processing techniques. Scanning electron micrograph and transmission electron micrograph show that the elongational flow in the VE improves the dispersion of NPCC (5 wt%) particles in the LDPE matrix. The dimensional distribution of NPCC particles in the VE is significantly lower than that of the SSE. Differential scanning calorimetric curves indicate that dynamic elongational flow can enhance the crystallization ability of the LDPE/NPCC nanocomposites. The mechanical properties of the VE‐extruded samples are superior to those of the SSE‐extruded samples. When compared with that of SSE, morphology of tensile fracture surfaces suggests that the uniform and fine dispersion of NPCC particles in the LDPE matrix can successfully improve modulus and toughness of the LDPE/NPCC nanocomposites based on the novel VE. POLYM. COMPOS., 35:884–891, 2014. © 2013 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Morphology and properties of nanocomposites based on HDPE/HDPE-g-MA blendsPolymer, 2010
- Controlling Morphologies and Tuning the Related Properties of Nano/Microstructured ZnO CrystallitesThe Journal of Physical Chemistry C, 2008
- Effect of organoclay structure on morphology and properties of nanocomposites based on an amorphous polyamidePolymer, 2008
- Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanismsPolymer, 2007
- Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer additionPolymer, 2006
- Exfoliation and dispersion enhancement in polypropylene nanocomposites by in‐situ melt phase ultrasonicationPolymer Engineering & Science, 2004
- Characteristics of polystyrene/polyethylene/clay nanocomposites prepared by ultrasound‐assisted mixing processPolymer Engineering & Science, 2004
- Non-linear dynamic buckling of laminated composite shallow spherical shellsComposites Science and Technology, 2000
- Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particlesPolymer, 1999
- Polymer Layered Silicate NanocompositesAdvanced Materials, 1996