A PARAMETRICAL STUDY OF THE BREAKUP AND ATOMIZATION PROCESS OF TWO IMPINGING LIQUID JETS

Authors:

Abstract
The break-up and atomization processes of two impinging liquid jets under various operating conditions were numerically investigated with tree-based adaptive mesh refinement (AMR) and volume of fluid (VOF) methods. Jet velocity, impingement angle, and jet momentum ratio were varied to provide a wide range of jet operation conditions. Results indicate that the overall spray pattern of two impinging jets atomization varies dramatically with the change of jet velocity; as a result, the atomization mode can be generally divided into four types based on the value of Weber and Reynolds number. The increasing of impingement angle results in the increase of the wavelength of impact wave, on the other hand, the decrease of break-up length of liquid sheets and the frequency of the impact wave. There exists an excessive impingement angle which may lead to the back-flow of the liquid fuel, and therefore causes serious wall ablation when impinging type injector is used in liquid rocket engine combustor. When the velocities of the two jets are not the same, the liquid sheet deviates from the symmetry axis, the jet with larger momentum dominates the development direction of the liquid sheet. Since the spray characteristics pre-dominate the combustion efficiency and stability, results of this paper can provide necessary information which would help to have a better understanding of the fundamental mechanism of impinging jets spray, thus improving combustor performance.