Impact of Rotor Material on the Optimal Geometry of High-Speed Drag-Cup Induction Motor
- 23 December 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 31 (2) , 455-465
Abstract
The aim of this paper is to investigate the impact of material properties on performance and optimal geometry of high-speed drag-cup induction motor (IM). Preliminary analytical considerations are performed in order to envisage and demonstrate the effects of changes of material specific conductivity on the motor performance. Based on these conclusions, 2-D finite element method (FEM) motor model is used to obtain performance prediction, and to perform the optimization of rotor geometry and air gaps for three different rotor materials in order to find a solution with the best possible efficiency in defined operation region. Simulation results are then verified and corrected through 3-D FEM simulations. After this, thermal and mechanical properties of all the three optimal solutions are investigated using some analytical formulas and 3-D FEM simulations. Based on the performed analysis and the evaluation of electromagnetic, thermal, and mechanical properties, the best solution is selected. Finally, the prototype of machine which is electromagnetically similar to drag-cup IM is built and tested. Results are compared with the FEM simulations in order to verify the given optimization procedure.Keywords
This publication has 17 references indexed in Scilit:
- Design of High-Speed, Low-Inertia Induction Machines With Drag-Cup RotorIEEE Transactions on Energy Conversion, 2014
- Stator Design and Air Gap Optimization of High Speed Drag-Cup Induction Motor using FEMAdvances in Electrical and Computer Engineering, 2013
- Electrical Machines2013
- Analysis of Semipermeable Containment Sleeve Technology for High-Speed Permanent Magnet MachinesIEEE Transactions on Energy Conversion, 2012
- Harmonic Loss and Torque Analysis of High-Speed Induction MotorsIEEE Transactions on Industry Applications, 2012
- Power Limits of High-Speed Permanent-Magnet Electrical Machines for Compressor ApplicationsIEEE Transactions on Energy Conversion, 2010
- Harmonic loss analysis and air-gap optimization of high speed induction motors2010
- Design of Rotating Electrical Machines2008
- A high speed induction machine with two-speed transmission as drive for electric vehicles2006
- Induction and permanent-magnet synchronous machines for high-speed applications2005