Warm Deformation Behavior and Flow Stress Modeling of AZ31B Magnesium Alloy under Tensile Deformation
Open Access
Abstract
Constitutive equations were recognized for AZ31B magnesium alloy at higher temperatures and strain rates from conventional empirical models like the original Johnson–Cook (JC), modified JC, and modified Zerilli–Armstrong (ZA) models for capturing the material warm deformation behavior. Uniaxial warm tensile tests were performed at temperatures (50 to 250 °C) and strain rates (0.005 to 0.0167 s) to probe AZ31 magnesium alloy flow stress values. Depending on the calculated flow stress, constitutive equations were recognized, and these established models were assessed by the coefficient of determination (), relative mean square error (RMSE), and average absolute relative error (AARE) metrics. The results demonstrated that the flow stress calculated by the modified JC and ZA models revealed good agreement against the test data. Thus, the outcomes confirmed that the recognized modified JC and modified ZA models could effectively forecast AZ31 magnesium alloy flow behavior by capturing the material deformation behavior accurately.
Keywords
Funding Information
- Seoul National University of Science and Technology
This publication has 44 references indexed in Scilit:
- A modified Johnson Cook model for elevated temperature flow behavior of T24 steelMaterials Science and Engineering: A, 2013
- Determination of Johnson–Cook parameters from machining simulationsComputational Materials Science, 2012
- A new mathematical model for predicting flow stress of typical high-strength alloy steel at elevated high temperatureComputational Materials Science, 2010
- A comparative study on Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr–1Mo steelComputational Materials Science, 2009
- A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steelMaterials Science and Engineering: A, 2009
- An improved multi-objective identification of Johnson–Cook material parametersInternational Journal of Impact Engineering, 2009
- Flow stress equation of AZ31 magnesium alloy sheet during warm tensile deformationJournal of Materials Processing Technology, 2008
- Application of neural networks to predict the elevated temperature flow behavior of a low alloy steelComputational Materials Science, 2008
- Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31BComputational Materials Science, 2008
- Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperaturesJournal of Materials Processing Technology, 2005