Analysis of Mode I and Mode II Tests for Composites with Translaminar Reinforcements
- 1 August 2005
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 39 (15) , 1311-1333
Abstract
This paper presents finite element models to determine the Mode I and Mode II fracture toughness of stitched composites in conjunction with experiments. Two new test methods to measure the Mode I and Mode II fracture toughness of stitched composites are developed. From the experimental load- deflection diagram, the effective fracture toughness can be determined by the area method. However, in order to comprehensively understand the effect of stitches, two parameters, Gc-par (parent material’s fracture toughness) and Gc-eff (effective fracture toughness) are needed to represent the fracture behavior of stitched composites. Gc-par is the intrinsic property of the parent material and is independent of stitch behavior. Gc-eff is the effective critical strain energy release rate that includes the effects of stitching. The purpose of performing the finite element analysis is to identify the correct physical models that represent the stitch interactions with the parent laminate and stitch failure mechanisms. Gc-par and Gc-eff can be obtained through different paths of the J-integral in the FE models. The models help in understanding the effects of stitch stiffness and spacing on the fracture toughness without the need for fabricating and testing stitched composite specimens.Keywords
This publication has 17 references indexed in Scilit:
- A Novel Double Cantilever Beam Test for Stitched Composite LaminatesJournal of Composite Materials, 2001
- A simplified beam analysis of the end notched flexure mode II delamination specimenComposite Structures, 1999
- Concepts for bridged Mode ii delamination cracksJournal of the Mechanics and Physics of Solids, 1999
- Analysis of a Stitched Double Cantilever BeamJournal of Composite Materials, 1998
- Effect of Reinforcing Tabs on the Mode I Delamination Toughness of Stitched CFRPsJournal of Composite Materials, 1998
- On the effects of stitching in CFRPs—II. Mode II delamination toughnessComposites Science and Technology, 1998
- On the effects of stitching in CFRPs—I. mode I delamination toughnessComposites Science and Technology, 1998
- Pointwise energy release rate in delaminated platesAIAA Journal, 1995
- On the effect of stitching on mode I delamination toughness of laminated compositesComposites Science and Technology, 1994
- The Use of Stitching to Suppress Delamination in Laminated Composites1985