LES Simulation of Direct Injection SI-Engine In-Cylinder Flow
Authors:
- 16 April 2012
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The present paper deals with the application of the LES approach to in-cylinder flow modeling. The main target is to study cycle-to-cycle variability (CCV) using 3D-CFD simulation. The engine model is based on a spark-ignited single-cylinder research engine. The results presented in this paper cover the motored regime aiming at analysis of the cycle-resolved local flow properties at the spark plug close to firing top dead center. The results presented in this paper suggest that the LES approach adopted in the present study is working well and that it predicts CCV and that the qualitative trends are in-line with established knowledge of internal combustion engine (ICE) in-cylinder flow. The results are evaluated from a statistical point of view based on calculations of many consecutive cycles (at least 10). Special attention is paid to local properties at the spark plug as these local conditions are supposed to strongly influence early phase of combustion process (early flame kernel development). Important conclusion is that the cold-flow local properties at the spark-plug (motored regime) is the source of significant CCV, which is supposed to be amplified when combustion is considered.Keywords
This publication has 22 references indexed in Scilit:
- Understanding ignition processes in spray-guided gasoline engines using high-speed imaging and the extended spark-ignition model SparkCIMM. Part A: Spark channel processes and the turbulent flame front propagationCombustion and Flame, 2011
- Application of a local SGS model based on coherent structures to complex geometriesInternational Journal of Heat and Fluid Flow, 2008
- Using Large Eddy Simulations to Study Mixing Effects in Early Injection Diesel Engine CombustionSAE International Journal of Advances and Current Practices in Mobility, 2006
- The subgrid-scale models based on coherent structures for rotating homogeneous turbulence and turbulent channel flowPhysics of Fluids, 2005
- Towards Large Eddy Simulation in Internal-Combustion Engines: Simulation of a Compressed Tumble FlowSAE International Journal of Advances and Current Practices in Mobility, 2004
- Large-Eddy Simulation in IC Engine GeometriesSAE International Journal of Advances and Current Practices in Mobility, 2004
- Large Eddy Simulations of Jet / Tumble Interaction in a GDI Model Engine FlowSAE International Journal of Advances and Current Practices in Mobility, 2004
- LES Modeling of Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2002
- Reynolds number effect on wall turbulence: toward effective feedback controlInternational Journal of Heat and Fluid Flow, 2002
- GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONSMonthly Weather Review, 1963