Improving Mechanical Properties of Carboxyl-Terminated Polybutadiene (CTPB) Binder System Using a Cure Accelerator
Open Access
Abstract
To address the issues of slow curing rate, post-curing reactions, and suboptimal mechanical properties in the carboxyl-terminated polybutadiene (CTPB)/epoxy resin (EP) binder system used for solid propellants, this study optimized the curing system by introducing 593 aliphatic amine compounds containing primary and secondary amine groups as a cure accelerator. It is found that the incorporation of the cure accelerator improved the fracture strength and elongation at break of the CTPB/EP binder system. With the addition of 0.3 wt.% cure accelerator, the tensile fracture strength increased to 0.37 MPa, while the elongation at break reached 655%. Moreover, augmenting the quantity of cure accelerator can substantially elevate the crosslink density and gel fraction of the binder system. When the addition reaches 0.3 wt.%, the crosslink density is 4.3 × 10−4 mol/cm3. Further studies showed that 593 cure accelerator reduced the activation energy of the curing reaction of the CTPB/EP binder system, with higher levels of cure accelerator resulting in lower activation energy. This study established a preparation methodology for a CTPB/EP binder system with high elongation and tensile strength. These findings provide a solid scientific foundation for the application of CTPB-based binder systems in solid propellants.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities
This publication has 40 references indexed in Scilit:
- Studies on the processing of HTPB‐based fast‐burning propellant with trimodal oxidiser distribution and its rheological behaviourAsia-Pacific Journal of Chemical Engineering, 2022
- Study on the compounding of a new type of trimer epoxy resin curing agentJournal of Applied Polymer Science, 2022
- Facile synthesis of three diazido compounds and their application in polyether polytriazido elastomers as solid propellant bindersPolymers for Advanced Technologies, 2021
- Experimental study of rheological properties of solid propellant slurry at low‐shear rate and numerical simulationJournal of Applied Polymer Science, 2020
- Network regulation and properties optimization of glycidyl azide polymer‐based materials as a candidate of solid propellant binder via alternating the functionality of propargyl‐terminated polyetherJournal of Applied Polymer Science, 2019
- Facile access to carboxyl‐terminated polybutadiene and polyethylene fromcis‐polybutadiene rubberJournal of Applied Polymer Science, 2018
- Acrylic copolymers crosslinked by click chemistry: Some aspects of synthesis, curing, and crosslinkingJournal of Applied Polymer Science, 2013
- Lifetime prediction of carboxyl‐terminated polybutadiene (CTPB)Journal of Applied Polymer Science, 1991
- Curing reactions in elastomers. II. Carboxy‐terminated polybutadieneJournal of Applied Polymer Science, 1983
- Oxidation and heat aging of carboxyl‐terminated polybutadieneJournal of Applied Polymer Science, 1966