Modeling of Elastoplastic Stress States in Crack Tip Regions
Authors:
- 1 March 2021
- journal article
- research article
- Published by Pleiades Publishing Ltd in Physical Mesomechanics
- Vol. 24 (3) , 237-242
Abstract
Although fracture mechanics offers a way to assess the probability of fracture in materials with critically stressed notches, its criteria can hardly account for complex configurations of structures (e.g., welded ones), residual stresses, and inhomogeneity of material properties. Besides, the use of strength criteria accounting for local plasticity requires special tests. Therefore, strength criteria based on physical deformation and fracture models are developed. Here, for analyzing the strength of a cracked material based on a generalized brittle fracture criterion, we propose a mathematical model of the elastoplastic stress state of its prefracture zone ahead of the crack tip. The model proceeds from several assumptions on plastic strains under simplified loading conditions, and its coefficients as well as characteristic load dependences of stresses and strains are found from extensive finite element data on materials with edge and surface cracks. From comparison with numerical data it follows that the proposed method of estimation gives an error of about 10%. The model provides an analytical description of the first principal stress in prefracture zones under loading, and its use in the brittle fracture criterion opens the way to assess to the strength of a wide range of structures.Keywords
This publication has 11 references indexed in Scilit:
- Elastoplastic State of Stress of a Plate with a CrackRussian Metallurgy (Metally), 2020
- Finite element simulation of elastoplastic field near crack tips and results for a central cracked plate of LE-LHP material under tensionActa Mechanica Sinica, 2019
- Stress-strain state in the vicinity of a crack tip under mixed loadingJournal of Applied Mechanics and Technical Physics, 2014
- The Eigenspectrum Approach and T-stress at the Mixed-mode Crack Tip for a Stress-state-dependent MaterialProcedia Materials Science, 2014
- The Investigation of the Stress State near the Crack Tip of Central Cracks through Numerical AnalysisProcedia Engineering, 2014
- Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardizationEngineering Fracture Mechanics, 2012
- Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yieldingInternational Journal of Plasticity, 2011
- Significance of K-dominance zone size and nonsingular stress field in brittle fractureEngineering Fracture Mechanics, 2011
- Elastic–plastic finite element analysis of the effect of compressive loading on crack tip parameters and its impact on fatigue crack propagation rateEngineering Fracture Mechanics, 2008
- Elastic–plastic finite element analysis for double-edge cracked tension (DE(T)) platesEngineering Fracture Mechanics, 2004