Sensitivity-Enhanced Photonic Crystal Fiber Refractive Index Sensor With Two Waist-Broadened Tapers
Authors:
- 19 January 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (4) , 1373-1379
Abstract
A new sensitivity-enhanced refractive index (RI) sensor based on photonic crystal fiber Mach-Zehnder interferometer (PCF-MZI) was proposed and experimentally demonstrated. It was realized by introducing a normal PCF-taper between two waist-broadened single mode fibers (SMF)-PCF-tapers, which were fabricated at the joints of a PCF and two SMFs using “overlap” splicing technique. Via tapering the PCF, the maximum RI sensitivity is increased by a factor of 1.73 owing to the evanescent field. Consequently, a maximum RI sensitivity of 281.6 nm/RIU is successfully achieved in the RI range of 1.3333-1.3737, which is around ten times higher than the RI sensitivity of SMF-MZI with two or three-cascaded-taper. Moreover, the proposed three-taper PCF-MZI is independent on temperature from 20 to 55 °C. In addition to temperature immunity, it has advantages such as high RI sensitivity, ease of fabrication and measurement, compactness, and robustness.Keywords
Funding Information
- National Natural Science Foundation of China (61273059, 61425003)
- Fundamental Research Funds for the Central Universities (N130104002, N140406005)
- State Key Laboratory of Synthetical Automation for Process Industries (2013ZCX09)
This publication has 39 references indexed in Scilit:
- A highly sensitive Mach–Zehnder interferometric refractive index sensor based on core-offset single mode fiberSensors and Actuators A: Physical, 2015
- Sensitivity enhancing of transition mode long-period fiber grating as methane sensor using high refractive index polycarbonate/cryptophane A overlay depositionSensors and Actuators B: Chemical, 2015
- An optical fiber curvature sensor based on photonic crystal fiber modal interferometerSensors and Actuators A: Physical, 2013
- All-Fiber Modal Interferometer Based on a Joint-Taper-Joint Fiber Structure for Refractive Index Sensing With High SensitivityIEEE Sensors Journal, 2013
- Temperature-independent refractometer based on a tapered photonic crystal fiber interferometerOptics Communications, 2013
- Humidity Sensor Based on a Multimode-Fiber Taper Coated With Polyvinyl Alcohol Interacting With a Fiber Bragg GratingIEEE Sensors Journal, 2011
- Photonic Crystal Fiber Strain Sensor Based on Modified Mach–Zehnder InterferometerIEEE Photonics Journal, 2011
- Label-free biosensing with high sensitivity in dual-core microstructured polymer optical fibersOptics Express, 2011
- Label-free and selective nonlinear fiber-optical biosensingOptics Express, 2008
- Towards biochips using microstructured optical fiber sensorsAnalytical and Bioanalytical Chemistry, 2006