Damping Control of Suspended Load for Truck Cranes in Consideration of Second Bending Mode Oscillation
Authors:
- 1 October 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4561-4568
Abstract
This article proposes a damping control of suspended loads for crane systems that take into consideration the second bending mode oscillation occurring at the sling hook in the middle of the suspending rope. In the proposed method, a suspended load of a crane is modeled as a double pendulum, and a state feedback control based on the model is used for damping control in consideration of the second bending mode oscillation as well as the first swinging mode oscillation. The effectiveness of the proposed method was evaluated using an actual track crane. For this purpose, firstly, parameters of the model of the actual crane were identified by experiments, and the characteristics such as the valve controller and the resonance of the crane-suspended load system has been clarified to check the validity of the double pendulum model. After the preliminary experiment, a controller designed based on the identified model was implemented in the actual crane, and the performance has been compared with a conventional controller based on a single pendulum model. As the result, it has been confirmed that for both the first swinging mode and the second bending mode oscillations, the proposed controller has achieved better damping performance than that of the conventional method and that the proposed method is effective for the second bending mode oscillation that occurs in the sling hook.Keywords
This publication has 10 references indexed in Scilit:
- A new discrete-time approach to anti-swing tracking control of overhead cranes2014
- Anti-sway Control for a Rotational Crane Based on the Back-stepping ApproachTransactions of the Society of Instrument and Control Engineers, 2013
- Reducing Vibration by Digital Filtering and Input ShapingIEEE Transactions on Control Systems Technology, 2010
- Anti-sway crane control based on dual state observer with sensor-delay correction2010
- A fuzzy-logic antiswing controller for three-dimensional overhead cranesISA Transactions, 2002
- Command shaping and closed-loop control interactions for a ship crane2002
- Sensor-Less Sway Control of Rotary Crane Considering the Collision Avoidance to the Ground.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2002
- Gain-Scheduling of Nonstationary Optimal Regulators Based on Multi-Design-Point. Its Application to Positioning and Vibration Control of Time-Varying Vibration Systems.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2000
- Command shaping control of an operator-in-the-loop boom crane1998
- Observing the State of a Linear SystemIEEE Transactions on Military Electronics, 1964