Effect of Different Sand Types and Fractions on Ballistic Resistance of High-Performance Steel Fibre-Reinforced Concrete
Open Access
Abstract
High-Performance Fibre-Reinforced Concrete (HPFRC) is an advanced composite material known for its exceptional energy absorption and dissipation capabilities. To improve its ballistic resistance, HPFRC samples were prepared using 1.5% steel fibre content and varying levels of silica. Ballistic trials employed standard 7.62 × 39 cartridges, each comprising a full metal casing around a mild steel core. Resulting damage and failure mechanisms were mapped using a 3D photogrammetry system. Six different concrete mixtures were tested, each incorporating aggregate fractions of 0/2 mm along with three types of micro sand, the largest of which measured up to 1.2 mm in grain size. The results suggested that increasing the proportion of 0/2 mm silica sand was relatively minor.Keywords
Funding Information
- Technology Agency of the Czech Republic (FW03010141)
- CTU in Prague (SGS25/048/OHK1/1T/11)
This publication has 22 references indexed in Scilit:
- Laboratory investigation on the influence of high compressive strain rates on the hybrid fibre reinforced self-compacting concreteConstruction and Building Materials, 2019
- Experimental field investigation of impact and blast load resistance of Ultra High Performance Fibre Reinforced Cementitious Composites (UHPFRCCs)Construction and Building Materials, 2015
- Development of a new Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRCC) for impact and blast protection of structuresConstruction and Building Materials, 2015
- Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shearCement and Concrete Composites, 2014
- Semi-theoretical analyses of the concrete plate perforated by a rigid projectileActa Mechanica Sinica, 2012
- Resistance of concrete protected by fabric to projectile impactCement and Concrete Research, 2007
- Penetration of grout and concrete targets with ogive-nose steel projectilesInternational Journal of Impact Engineering, 1996
- An empirical equation for penetration depth of ogive-nose projectiles into concrete targetsInternational Journal of Impact Engineering, 1994
- Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengthsInternational Journal of Impact Engineering, 1992
- Penetration, scabbing and perforation of concrete structures hit by solid missilesNuclear Engineering and Design, 1989