A Methodology to Predict Surface Wear of Planetary Gears Under Dynamic Conditions#
Authors:
- 25 October 2010
- journal article
- research article
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 38 (4) , 493-515
Abstract
In this study, a torsional dynamic model and a surface wear model are combined to study the interaction between the surface wear and the dynamic response of planetary gear sets. The proposed dynamic planetary gear wear model includes the influence of worn surface profiles on the dynamic tooth forces and the motion transmission error as well as the influence of dynamic tooth forces on wear profiles. The dynamic model includes the gear backlash and the periodic time variation of gear mesh stiffnesses. The model is used to investigate the interactions between the surface wear and the dynamic behavior within both linear and nonlinear response regimes. Several sets of simulation results are used to demonstrate the two-way relationship between nonlinear planetary gear dynamics and tooth surface wear.Keywords
This publication has 29 references indexed in Scilit:
- Internal Gear Strains and Load Sharing in Planetary Transmissions: Model and ExperimentsJournal of Mechanical Design, 2008
- An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load SharingJournal of Mechanical Design, 2008
- Nonlinear dynamics of a planetary gear system with multiple clearancesMechanism and Machine Theory, 2003
- A deformable body dynamic analysis of planetary gears with thin rimsJournal of Sound and Vibration, 2003
- Effect of Involute Tip Relief on Dynamic Response of Spur Gear PairsJournal of Mechanical Design, 1999
- Experiments on Nonlinear Dynamic Behavior of an Oscillator With Clearance and Periodically Time-Varying ParametersJournal of Applied Mechanics, 1997
- Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearityJournal of Sound and Vibration, 1995
- Planetary Gear Train DynamicsJournal of Mechanical Design, 1994
- Epicyclic Gear VibrationsJournal of Engineering for Industry, 1976
- Dynamic Tooth Loads in Epicyclic GearsJournal of Engineering for Industry, 1974