Response surface methodology–based optimisation of adsorption of diclofenac and treatment of pharmaceutical effluent using combined coagulation-adsorption onto nFe2O3 decorated water chestnut shells biochar
- 3 September 2024
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (43) , 55317-55335
Abstract
This work involved the preparation of pristine and iron nanoparticle-loaded biochar from a water chestnut shell to remove diclofenac sodium (DCF) containing effluent of pharmaceutical origin. To create suitable forecasting equations for the modelling of the DCF adsorption onto the adsorbent, response surface methodology (RSM) was used. The parameters, e.g. pH, adsorbent mass, DCF concentration and contact time, were used for the modeling of adsorption. The RSM model predicts that for 98.0% DCF removal, the ideal conditions are pH 6, an adsorbent dose of 0.5 g L−1, and a contact time of 60 min with an initial adsorbate concentration of 25 mg L−1 at 303 K. The maximum capacity deduced from the Langmuir model was 75.9 mg g−1 for pristine water chestnut shell biochar (pWCBC) and 122.3 mg g−1 for magnetically modified nano-Fe2O3 biochar (mWCBC). Under equilibrium conditions, the Langmuir model was the best-suited model compared to the Temkin and Freundlich models. The adsorption data in this investigation efficiently fitted the pseudo-second-order model, emphasizing that chemisorption or ion exchange processes may be involved in the process. The WCBC demonstrated recyclability after 10 cycles of repeated adsorption and desorption of DCF. A combined coagulation adsorption process removed COD, NH3–N, NO3−, PO43−, and DCF by 92.50%, 86.41%, 77.57%, 84.54%, and 97.25%, respectively. This study therefore shows that coagulation followed by adsorption onto biochar can be a cost-effective substitute for conventional pharmaceutical wastewater treatment. Graphical AbstractKeywords
This publication has 57 references indexed in Scilit:
- Modified Rice Husk Waste‐Based Filter for Wastewater Treatment: Pilot Study and Reuse PotentialChemical Engineering & Technology, 2024
- Removal of lead in water by coagulation flocculation process using Cactus-based natural coagulant: optimization and modeling by response surface methodology (RSM)Environmental Monitoring and Assessment, 2024
- Effective removal of Cr(VI) ions from the aqueous solution by agro-waste-based biochar: an exploration of batch and column studiesBiomass Conversion and Biorefinery, 2023
- Removal of diclofenac and ibuprofen on mesoporous activated carbon from agro-industrial wastes prepared by optimized synthesis employing a central composite designBiomass Conversion and Biorefinery, 2022
- Impact, disease outbreak and the eco-hazards associated with pharmaceutical residues: a Critical reviewInternational Journal of Environmental Science and Technology, 2021
- Removal of sodium diclofenac from aqueous solutions by rice hull biocharBiochar, 2021
- Biochar physicochemical properties: pyrolysis temperature and feedstock kind effectsReviews in Environmental Science and Bio/Technology, 2020
- Statistical optimization and modeling approach for azo dye decolorization: Combined effects of ultrasound waves and nanomaterial‐based adsorbentApplied Organometallic Chemistry, 2018
- Physiological effects of diclofenac, ibuprofen and propranolol on Baltic Sea blue musselsAquatic Toxicology, 2010
- Spectrophotometric determination of Diclofenac sodium with Methylene BlueTalanta, 1995