Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces
Authors:
- 25 April 2005
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 127 (2) , 280-288
Abstract
This two-part paper is aimed at developing a theoretical and numerical simulation basis for initial penetration phenomena that profoundly influence hole tolerances and shape. In Part 1, dynamic force models are developed followed by models of the drill’s dynamic behavior in Part 2. Next, these models are combined and used to predict initial penetration behavior and hole shape. A comparison of simulated and experimental results concludes Part 2. In this part, by considering the effects of drill grinding errors and drill deflections, dynamic cutting chip thickness models are developed which, in combination with workpiece surface inclination effects, allow the formulation of expressions for the dynamic chip thickness and cutting chip cross-sectional area. By using these quantities to replace their static counterparts, static drilling force models are extended to facilitate the prediction of dynamic cutting forces. Separate thrust, torque, and radial force models for the major cutting edges, secondary cutting edge, and for the indentation zone are formulated. The effects of drill installation errors on the radial cutting forces acting on the chisel edge and the major cutting edges are also included.Keywords
This publication has 11 references indexed in Scilit:
- A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite MaterialsJournal of Engineering for Industry, 1995
- Positional Accuracy of Holes When Drilling in Inclined Workpiece Surfaces Part 2: Mathematical Force ModelProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1994
- Positional Accuracy of Holes When Drilling in Inclined Workpiece Surfaces Part 1: Experimental ResultsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1994
- Geometry of drill elementsInternational Journal of Machine Tool Design and Research, 1985
- Analytical Prediction of Three Dimensional Cutting Process—Part 1: Basic Cutting Model and Energy ApproachJournal of Engineering for Industry, 1978
- A Study of the Drilling ProcessJournal of Engineering for Industry, 1974
- Drilling with flat rake face and conventional twist drills—I. Theoretical investigationInternational Journal of Machine Tool Design and Research, 1972
- Mechanics of Metal Cutting for a Material of Variable Flow StressJournal of Engineering for Industry, 1963
- Rate of Strain Effect in Metal CuttingJournal of Engineering for Industry, 1963
- On the Drilling of Metals: 2—The Torque and Thrust in DrillingTransactions of the American Society of Mechanical Engineers, 1957