Engineering stable interfaces for three-dimensional lithium metal anodes
Open Access
- 6 July 2018
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 4 (7) , eaat5168
Abstract
Lithium metal has long been considered one of the most promising anode materials for advanced lithium batteries (for example, Li-S and Li-O2), which could offer significantly improved energy density compared to state-of-the-art lithium ion batteries. Despite decades of intense research efforts, its commercialization remains limited by poor cyclability and safety concerns of lithium metal anodes. One root cause is the parasitic reaction between metallic lithium and the organic liquid electrolyte, resulting in continuous formation of an unstable solid electrolyte interphase, which consumes both active lithium and electrolyte. Until now, it has been challenging to completely shut down the parasitic reaction. We find that a thin-layer coating applied through atomic layer deposition on a hollow carbon host guides lithium deposition inside the hollow carbon sphere and simultaneously prevents electrolyte infiltration by sealing pinholes on the shell of the hollow carbon sphere. By encapsulating lithium inside the stable host, parasitic reactions are prevented, resulting in impressive cycling behavior. We report more than 500 cycles at a high coulombic efficiency of 99% in an ether-based electrolyte at a cycling rate of 0.5 mA/cm2 and a cycling capacity of 1 mAh/cm2, which is among the most stable Li anodes reported so far.Keywords
Funding Information
- U.S. Department of Energy
- Robert Bosch LLC (03.25.SS.15)
This publication has 40 references indexed in Scilit:
- Reviving the lithium metal anode for high-energy batteriesNature Nanotechnology, 2017
- Why Do Lithium–Oxygen Batteries Fail: Parasitic Chemical Reactions and Their Synergistic EffectAngewandte Chemie International Edition, 2016
- Promises and challenges of nanomaterials for lithium-based rechargeable batteriesNature Energy, 2016
- Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodesNature Nanotechnology, 2016
- Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coatingProceedings of the National Academy of Sciences, 2016
- Aprotic and Aqueous Li–O2 BatteriesChemical Reviews, 2014
- Lithium metal anodes for rechargeable batteriesEnergy & Environmental Science, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutionsSolid State Ionics, 2002
- Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) BatteriesJournal of the Electrochemical Society, 2000