The Effect of the Reference Electrode Position on the Measurement of Half Cell Polarization in Proton-Exchange Membrane Fuel Cells
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (7) , F181-F186
Abstract
In this experimental and numerical study we analyze the polarization of the electrodes in a PEM fuel cell system. In order to measure the anode and cathode potential with respect to the electrolyte potential, a dynamic hydrogen electrode (DHE) is used as reference electrode. Two fundamental configurations for integrating a DHE into the membrane electrode assembly (MEA) are investigated: In the first configuration, the DHE is contacted to the membrane within a circular gap in the cathode catalyst layer, which is called edge configuration. In the second configuration, the DHE is placed between two membrane layers, which is called sandwich configuration. Differences between the reference electrode setups can be ascribed to an inhomogeneous electrolyte potential distribution close to the edge of the electrodes as described in literature. Our 2D fuel cell model as published in an earlier article is used to investigate this effect. We show that it is not possible to detect the electrode polarization by use of a reference electrode in edge configuration. By use of the sandwich configuration, the polarization of the anode and cathode half cells can be measured independently.Keywords
This publication has 16 references indexed in Scilit:
- Degradation Caused by Dynamic Operation and Starvation Conditions2012
- Study of the cell reversal process of large area proton exchange membrane fuel cells under fuel starvationJournal of Power Sources, 2009
- Study on the processes of start-up and shutdown in proton exchange membrane fuel cellsJournal of Power Sources, 2009
- In-Situ Reference Electrode Testing for Cathode Carbon CorrosionECS Transactions, 2007
- Realising a reference electrode in a polymer electrolyte fuel cell by laser ablationJournal of Applied Electrochemistry, 2007
- Compact dynamic hydrogen electrode unit as a reference electrode for PEMFCsJournal of Power Sources, 2006
- Measurement of single electrode potentials and impedances in hydrogen and direct methanol PEM fuel cellsElectrochimica Acta, 2004
- Application of a hydrogen reference electrode to a solid state water removal deviceJournal of Applied Electrochemistry, 2000
- Dependence of observed overvoltages on the positioning of the reference electrode on the solid electrolyteSolid State Ionics, 1994
- A Practical Reference ElectrodeJournal of the Electrochemical Society, 1964