Enhanced Energy Storage in Lithium-Metal Batteries via Polymer Electrolyte Polysulfide–Polyoxide Conetworks
- 24 May 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (22) , 27173-27182
Abstract
The present article entails a novel concept of storing extra energy in a multifunctional polymer electrolyte membrane (PEM) beyond the storage capacity of a cathode, which is achieved by so-called "prelithiation" upon simply deep discharging to a low potential range of a lithium-metal electrode (i.e., -0.5 to 0.5 V). This unique extra energy-storage capacity has been realized recently in the PEM consisting of polysulfide-co-polyoxide conetworks in conjunction with succinonitrile and LiTFSI salt that facilitate complexation via ion-dipole interaction of dissociated lithium ions with thiols, disulfide, or ether oxygen of the conetwork. Although ion-dipole complexation may increase the cell resistance, the prelithiated PEM provides excess lithium ions during oxidation (or Li+ stripping) at the Li-metal electrode. Once the PEM network is fully saturated with Li ions, the remaining excess ions can move through the complexation sites at ease, thereby affording not only facile ion transport but also extra ion-storage capacity within the PEM conetwork. Of particular interest is that the lithiated polysulfide-co-polyoxide polymer network-based PEM exhibits a high conductivity of 1.18 × 10-3 S/cm at ambient, which can also store extra energy with a specific capacity of about 150 mAh/g at a 0.1C rate in the PEM voltage range of 0.01-3.5 V in addition to 165 mAh/g at 0.2C of an NMC622 (nickel manganese cobalt oxide) cathode (i.e., 2.5-4.6 V) with a Coulombic efficiency of approximate unity. Moreover, its Li-metal battery assembly with an NMC622 cathode exhibits a very high specific capacity of ∼260 mAh/g at 0.2C in the full battery range of 0.01-5 V, having a higher Li+ transference number of 0.74, suggestive of domination by the lithium cation transport relative to those (0.22-0.35) of organic liquid electrolyte lithium-ion batteries.Keywords
Funding Information
- Nissan North America
This publication has 65 references indexed in Scilit:
- Thermal runaway caused fire and explosion of lithium ion batteryJournal of Power Sources, 2012
- Factors affecting cyclic durability of all-solid-state lithium polymer batteries using poly(ethylene oxide)-based solid polymer electrolytesEnergy & Environmental Science, 2010
- Capacity Fading Mechanism in All Solid‐State Lithium Polymer Secondary Batteries Using PEG‐Borate/Aluminate Ester as Plasticizer for Polymer ElectrolytesAdvanced Functional Materials, 2009
- Enhancement of ion transport in polymer electrolytes by addition of nanoscale inorganic oxidesJournal of Power Sources, 2001
- Inorganic-Organic Composite Solid Polymer ElectrolytesJournal of the Electrochemical Society, 2000
- Conductivity and Electrochemical Stability of Electrolytes Containing Organic Solvent Mixtures with Lithium tris(Trifluoromethanesulfonyl)methideJournal of the Electrochemical Society, 1996
- Relation between impedance and temperature during radiofrequency ablation of accessory pathwaysAmerican Heart Journal, 1995
- The Study of Electrolyte Solutions Based on Ethylene and Diethyl Carbonates for Rechargeable Li Batteries: I . Li Metal AnodesJournal of the Electrochemical Society, 1995
- Market for nickel-cadmium batteriesJournal of Power Sources, 1995
- New solvating cross-linked polyether for lithium batteriesJournal of Power Sources, 1995