Novel Polymer Substrate-Based 1.2kV/40A Double-Sided Intelligent Power Module
Authors:
- Xin ZhaoXZXin Zhao
- Yifan JiangYJYifan Jiang
- Bo GaoBGBo Gao
- Kenji NishiguchiKNKenji Nishiguchi
- Yoshi FukawaYFYoshi Fukawa
- Douglas C. HopkinsDHDouglas C. Hopkins
- 1 May 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1461-1467
Abstract
Advanced power module packaging technology is currently being heavily investigated to take full advantage of Wide Band Gap (WBG) power semiconductor devices. As one of most widely applied power module technologies, intelligent power modules, typically for automotive industries, work well to achieve higher operating frequencies with lower losses by integrating gate driver circuits with power semiconductor devices. In this paper, a novel flexible polymer substrate-based intelligent power module is developed and characterized. By applying 80 μm-thick epoxy-resin based flexible dielectric as a substrate, the overall weight and volume of the power module is reduced, as well as the cost, compared with traditional direct bonded copper ceramic-based modules. The performance of the epoxy-resin based dielectric is investigated, and shows that the leakage current of the dielectric at >1.5 kV is less than 20 μA at 250 °C. Double-sided solderable 1.2 kV SiC MOSFETs and Schottky diodes are fabricated and applied in the module without bonding wires, significantly reducing the overall parasitic inductance to <;1 nH from simulation. A module is designed to integrate not only power devices and gate driver circuits, but also isolation circuits. The overall size of the module is within 15.5 mm × 35 mm × 3mm. Electrical measurements under static conditions indicate the SiC devices in the double-sided module fully exhibits performance better than data shown on the manufacturers' datasheets.Keywords
This publication has 6 references indexed in Scilit:
- Challenges and opportunities in flexible electronics2016
- Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the ProcessIEEE Transactions on Components, Packaging and Manufacturing Technology, 2016
- Condition Monitoring IGBT Module Bond Wires Fatigue Using Short-Circuit Current IdentificationIEEE Transactions on Power Electronics, 2016
- Decomposition and electro-physical model creation of the CREE 1200V, 50A 3-Ph SiC module2016
- Survey of High-Temperature Reliability of Power Electronics Packaging ComponentsIEEE Transactions on Power Electronics, 2014
- Planar bond all: A new packaging technology for advanced automotive power modules2012