Improving Energy Harvesting from Bridge Vibration Excited by Moving Vehicles with a Bi-Stable Harvester
Open Access
Abstract
To monitor the health status of the bridge, many sensors are needed to be mounted on it. Converting bridge vibration energy to electrical energy is considered as a potential solution to the problem of providing reliable electric power to these sensors. The objective of this work is to present an operable strategy for improving the electric energy output of a piezoelectric energy harvester installed on a bridge by introducing bi-stable characteristics. A bi-stable harvester is proposed. By adjusting the tip and fixed magnets, different types of potential energy can be generated, and then the harvester can exhibit the linear, mono-stable and bi-stable characteristics. In the bi-stable state, the harvester triggers snap-through motions easily and generates large outputs. The corresponding prototype was fabricated, and the experiment was carried out to validate the advantage of the bi-stable energy harvester. The experiment results show that the bi-stable energy harvester outperforms the classical linear harvester over the whole range of vehicle speed. As the vehicle speed exceeds a critical one, the snap-through motion will happen, which is beneficial to enhancing the electricity output. This conceptual design may provide guidance for promoting the performance of bridge energy harvesting.Keywords
Funding Information
- National Natural Science Foundation of China (Grant No. 52005155)
This publication has 29 references indexed in Scilit:
- Piezoelectric-based energy harvesting in bridge systemsJournal of Intelligent Material Systems and Structures, 2013
- Piezoelectric energy harvesting from traffic-induced bridge vibrationsSmart Materials and Structures, 2013
- Broadband vibration energy harvesting based on cantilevered piezoelectric bi-stable compositesApplied Physics Letters, 2013
- Broadband energy harvesting through a piezoelectric beam subjected to dynamic compressive loadingSmart Materials and Structures, 2013
- Bistable vibration energy harvesters: A reviewJournal of Intelligent Material Systems and Structures, 2012
- Improving functionality of vibration energy harvesters using magnetsJournal of Intelligent Material Systems and Structures, 2012
- Relative performance of a vibratory energy harvester in mono- and bi-stable potentialsJournal of Sound and Vibration, 2011
- Analysis of energy harvesters for highway bridgesJournal of Intelligent Material Systems and Structures, 2011
- Simulation of a Duffing oscillator for broadband piezoelectric energy harvestingSmart Materials and Structures, 2011
- Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical couplingJournal of Sound and Vibration, 2011