Energy‐Efficient Actuation for Wearable Exoskeletons: A Virtual Prototype
Open Access
- 1 January 2025
- journal article
- Published by Wiley in Applied Bionics and Biomechanics
- Vol. 2025 (1) , 7248941
Abstract
This study investigates the power consumption of an assistive wearable exoskeleton actuation system using a virtual experimental framework. Different actuation system variants, including rigid, series elastic, and parallel elastic actuation in both single and dual configurations, were analyzed and compared with a mathematical model. The results demonstrated a strong correlation between the virtual and mathematical models, with only minor variations in power consumption across certain transmission system combinations. The study further found that combining harmonic drives with a belt and pulley mechanism resulted in reduced energy usage. Among the configurations analyzed, the dual variable parallel elastic actuation (VPEA) system, featuring harmonic drives at the hip and knee joints and ball screws at the ankle, proved to be the most energy‐efficient setup. These findings validate the accuracy of the mathematical model and offer valuable guidelines for optimizing exoskeleton actuation systems to enhance their efficiency and performance.Keywords
This publication has 32 references indexed in Scilit:
- Actuation system modelling and design optimization for an assistive exoskeleton for disabled and elderly with series and parallel elasticityTechnology and Health Care, 2023
- An integrated evaluation approach of wearable lower limb exoskeletons for human performance augmentationScientific Reports, 2023
- Characterizing the relationship between peak assistance torque and metabolic cost reduction during running with ankle exoskeletonsJournal of NeuroEngineering and Rehabilitation, 2022
- Design and Control of a Series–Parallel Elastic Actuator for a Weight-Bearing Exoskeleton RobotSensors, 2022
- Sensors and Actuation Technologies in Exoskeletons: A ReviewSensors, 2022
- Wearable Lower-Limb Exoskeleton for Children With Cerebral Palsy: A Systematic Review of Mechanical Design, Actuation Type, Control Strategy, and Clinical EvaluationIEEE Transactions on Neural Systems and Rehabilitation Engineering, 2021
- Mobility related physical and functional losses due to aging and disease - a motivation for lower limb exoskeletonsJournal of NeuroEngineering and Rehabilitation, 2019
- A Simulation Framework for Virtual Prototyping of Robotic ExoskeletonsJournal of Biomechanical Engineering, 2016
- State of the Art and Future Directions for Lower Limb Robotic ExoskeletonsIEEE Transactions on Neural Systems and Rehabilitation Engineering, 2016
- Mobility Outcomes Following Five Training Sessions with a Powered ExoskeletonTopics in Spinal Cord Injury Rehabilitation, 2015