Experimental Study of a Gas-Liquid-Solid Three-Phase Flow in an Aeration Tank Driven by an Inverted Umbrella Aerator
Open Access
Abstract
The three-phase flow in a aeration tank driven by an inverted umbrella aerator is relatively complex, including the processes of the hydraulic jump, air entrainment, and sludge particle sedimentation. A three-phase flow test bench for an inverted umbrella aerator is established for studying its influence on aeration performance. The experiment mainly studies the changed law of aeration performance under different immersion depths or sludge concentrations and measures the flow rate and sludge concentrations in the aeration tank in different working conditions. The results are as follows. (1) The total oxygen transfer coefficient, standard oxygenation capacity, and standard power efficiency increase with the increase in rotational speed. The total oxygen transfer coefficient and standard-charge oxygen capacity first increase and then decrease with the decrease in immersion depth, reaching a maximum at −20 mm immersion depth. The standard dynamic efficiency has a similar trend and reaches a maximum at −8 mm immersion depth. (2) In the aeration tank, the flow velocity near the impeller is faster and has greater turbulence. The shallow water is more profoundly affected by the impeller compared with the deeper water. (3) The shallow-water sludge varies greatly, and the deep-water sludge is distributed uniformly when the inverted umbrella aerator works stably.Keywords
This publication has 12 references indexed in Scilit:
- Study on the internal two-phase flow of the inverted-umbrella aeratorAdvances in Mechanical Engineering, 2019
- The Oxidation Ditch Flow Field Analysis Pushed by the New Type Surface Inverted Umbrella Aerator2013
- The Finite Element Analysis and Optimal Design to Inverted Umbrella AeratorAdvanced Materials Research, 2011
- Simulation of Component Distributions in a Full-Scale Carrousel Oxidation Ditch: A Model Coupling Sludge-Wastewater Two-Phase Turbulent Hydrodynamics with Bioreaction KineticsEnvironmental Engineering Science, 2010
- PDA experiments and CFD simulation of a lab-scale oxidation ditch with surface aeratorsChemical Engineering Research and Design, 2010
- Flow field and residence time distribution simulation of a cross-flow gas–liquid wastewater treatment reactor using CFDChemical Engineering Science, 2008
- Effects of the Injection Period on the Rise Velocity and Shape of a Bubble in a Non-Newtonian FluidChemical Engineering Research and Design, 2006
- Calibration and Application of a 1-D Model for Oxidation DitchesChemical Engineering Research and Design, 2003
- Prediction of Mean Circulation Velocity in Oxidation DitchEnvironmental Technology, 2001
- Modelling of oxidation ditches using an open channel flow 1-D advection-dispersion equation and ASM1 process descriptionWater Science & Technology, 1997