Experimental and Numerical Study of Three-Dimensional Flows in a Mixed-Flow Pump Stage
Authors:
- 1 July 1996
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 118 (3) , 552-561
Abstract
Internal flows of a low-specific-speed pump stage, having a mixed-flow impeller and a vaned bowl diffuser combination, have been investigated experimentally and numerically. Air was used as the test fluid, and the internal flows were measured at various locations and under various capacities. Flow calculations were made, for both the isolated impeller case and the complete stage case, using Denton viscous codes LOSS3D and MULTSTAGE14, by which the three-dimensional steady flow through multiple blade rows can be calculated using the interrow mixing process. Experimental results showed the effects of the interaction between the impeller and the reverse flow, originating in the downstream diffuser, even at the design point capacity. While an impeller exit reverse flow occurred at the shroud side in the isolated impeller calculation, it was observed at the hub side in the complete stage case, showing good agreement with the experimental results. Although the flow in the diffuser was highly distorted due to a strong swirl flow, patterns of total pressure distribution could be predicted well by the complete stage calculation.Keywords
This publication has 14 references indexed in Scilit:
- Experimental and Computational Investigation of the NASA Low-Speed Centrifugal Compressor Flow FieldJournal of Turbomachinery, 1993
- Simulating Unsteady Turbomachinery Flows on Unstructured Meshes Which Adapt Both in Time and Space1993
- Study of Internal Flows in a Mixed-Flow Pump Impeller at Various Tip Clearances Using Three-Dimensional Viscous Flow ComputationsJournal of Turbomachinery, 1992
- NASA Low-Speed Centrifugal Compressor for Three-Dimensional Viscous Code Assessment and Fundamental Flow Physics ResearchJournal of Turbomachinery, 1992
- The Calculation of Three-Dimensional Viscous Flow Through Multistage TurbomachinesJournal of Turbomachinery, 1992
- Application of Viscous Flow Computations for the Aerodynamic Performance of a Backswept Impeller at Various Operating ConditionsJournal of Turbomachinery, 1988
- Development of a 3D Navier Stokes Solver for Application to all Types of Turbomachinery1988
- The Use of a Distributed Body Force to Simulate Viscous Effects in 3D Flow Calculations1986
- An Improved Time-Marching Method for Turbomachinery Flow CalculationJournal of Engineering for Power, 1983
- Detailed Flow Investigations Within a High-Speed Centrifugal Compressor ImpellerJournal of Fluids Engineering, 1976