Effect of plasma nitriding process on the fatigue and high temperature corrosion resistance of Inconel 740H nickel alloy
Open Access
- 28 January 2022
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 22 (1) , 1-15
Abstract
The paper presents a comparison of microhardness, fatigue and high temperature corrosion of Inconel 740H nickel alloy in its as-received state and the same material with nitrided surface layers. The nitrided layers were produced using traditional glow discharge nitriding (specimens nitriding on the cathode potential) and an active screen (specimens nitriding at the plasma potential). A microstructure of the layers was characterized through the scanning electron microscopy, X-ray energy dispersive spectroscopy and X-ray diffraction analysis. Mechanical properties of the nitrided Inconel 740H alloy were examined using microhardness measurements and standard fatigue tests. It was found that Inconel 740H with a nitrided surface exhibited an improved fatigue response of 50 MPa in the whole range of stress amplitudes from 350 to 650 MPa and almost 325% increase of hardness for plasma modified surface and 250% for cathode modified surface. Additionally, the application of cathode nitriding enhanced the corrosion resistance of the alloy in question and effectively protected it against a high temperature oxidation.Keywords
Funding Information
- European Regional Development Fund (POIG.01.01.02-00-015/08-01)
This publication has 28 references indexed in Scilit:
- Process technologies for thermochemical surface engineering2015
- Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanismsOptics & Laser Technology, 2014
- Oxidation of Inconel 625 superalloy upon treatment with oxygen or hydrogen plasma at high temperatureApplied Surface Science, 2014
- Laser surface modification of steel for slurry erosion resistance in power plants2012
- Fatigue Properties of Radical Nitrided Alloy 718 at Elevated Temperature under Push Pull LoadingJournal of the Society of Materials Science, Japan, 2010
- Surface Modification of Inconel 718 Superalloy by Plasma Immersion Ion Implantation2010
- Modifying the properties of the Inconel 625 nickel alloy by glow discharge assisted nitridingVacuum, 2009
- Wear of plasma-nitrided aluminum alloysWear, 2005
- Effect of ion nitriding on fatigue behaviour of AISI 4140 steelMaterials Science and Engineering: A, 2000
- Low cycle fatigue behavior of inconel 718 at 298 K and 823 KMetallurgical Transactions A, 1977