Failure assessment on offshore girth welded pipelines due to corrosion defects
Authors:
- 26 November 2015
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 39 (4) , 453-466
Abstract
Corrosion is an electrochemical process in offshore pipelines where the material strength begins to decrease as corrosion advances. Numerous studies have been performed to determine the remaining strengths (failure pressure) of corroded pipelines. Currently the axial corrosions of the girth welded pipelines still leave much to be understood. This study attempted to simulate girth welded pipeline with various corroded depths and lengths in order to compare with offshore pipeline design manuals. Based on the numerical results, the influence of corrosion defects parameters on remaining strengths were investigated for girth welded pipelines. The investigation on the effect of strength mismatch revealed that in the cases of under‐matched, higher failure pressures are obtained. Comparisons of current results with B31G‐2012 and DNV‐RP‐F101 demonstrated that both codes may produce somewhat conservative predictions on the failure pressure. Furthermore, an equation was proposed to evaluate the corrosion progress across girth welded pipelines.Keywords
Funding Information
- Nanyang Environment and Water Research Institute
- Interdisciplinary Graduate School, Nanyang Technological University, Singapore
This publication has 22 references indexed in Scilit:
- Assessment on failure pressure of high strength pipeline with corrosion defectsEngineering Failure Analysis, 2013
- Fracture analysis of girth welded pipelines with 3D embedded cracks subjected to biaxial loading conditionsEngineering Fracture Mechanics, 2012
- Failure prediction for Crack-in-Corrosion defects in natural gas transmission pipelinesInternational Journal of Pressure Vessels and Piping, 2012
- Fracture capacity of girth welded pipelines with 3D surface cracks subjected to biaxial loading conditionsInternational Journal of Pressure Vessels and Piping, 2012
- Fatigue of stress corrosion cracks in X65 pipeline steelsInternational Journal of Fatigue, 2008
- Failure analysis of a crude oil pipelineEngineering Failure Analysis, 2007
- A model of corrosion fatigue crack growth in ship and offshore steelsFatigue & Fracture of Engineering Materials & Structures, 2007
- Failure analysis of fuel supply pipelineEngineering Failure Analysis, 2006
- Integrity of pressurized components with localized corrosion under internal pressure and transient thermal loadingFatigue & Fracture of Engineering Materials & Structures, 2003
- MECHANICS AND MATERIAL ASPECTS IN PREDICTING SERVICEABILITY LIMITED BY STRESS‐CORROSION CRACKINGFatigue & Fracture of Engineering Materials & Structures, 1998