Development of three-dimensional printing filaments based on poly(lactic acid)/hydroxyapatite composites with potential for tissue engineering
- 18 January 2021
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 55 (17) , 2289-2300
Abstract
Injured bone tissues can be healed with scaffolds, which could be manufactured using the fused deposition modeling (FDM) strategy. Poly(lactic acid) (PLA) is one of the most biocompatible polymers suitable for FDM, while hydroxyapatite (HA) could improve the bioactivity of scaffold due to its chemical composition. Therefore, the combination of PLA/HA can create composite filaments adequate for FDM and with high osteoconductive and osteointegration potentials. In this work, we proposed a different approache to improve the potential bioactivity of 3D printed scaffolds for bone tissue engineering by increasing the HA loading (20-30%) in the PLA composite filaments. Two routes were investigated regarding the use of solvents in the filament production. To assess the suitability of the FDM-3D printing process, and the influence of the HA content on the polymer matrix, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed. The HA phase content of the composite filaments agreed with the initial composite proportions. The wettability of the 3D printed scaffolds was also increased. It was shown a greener route for obtaining composite filaments that generate scaffolds with properties similar to those obtained by the solvent casting, with high HA content and great potential to be used as a bone graft.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2018/07860-9)
This publication has 42 references indexed in Scilit:
- Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineeringColloids and Surfaces B: Biointerfaces, 2013
- Improved flexibility of thermally stable poly-lactic acid (PLA)Carbohydrate Polymers, 2012
- Biomaterials & scaffolds for tissue engineeringMaterials Today, 2011
- Biomanufacturing for tissue engineering: Present and future trendsVirtual and Physical Prototyping, 2009
- Designing a highly bioactive 3D bone-regenerative scaffold by surface immobilization of nano-hydroxyapatiteJournal of Materials Chemistry, 2008
- Simultaneous in vivo comparison of bone substitutes in a guided bone regeneration modelBiomaterials, 2008
- Crystallization of hydroxyapatite at physiological temperatureMaterials Letters, 2003
- Biodegradable and biocompatible nanocomposites of poly(ϵ‐caprolactone) with hydroxyapatite nanocrystals: Thermal and mechanical propertiesJournal of Applied Polymer Science, 2002
- Interaction of Different Types of Cells on Polymer Surfaces with Wettability GradientJournal of Colloid and Interface Science, 1998
- The Scherrer Formula for X-Ray Particle Size DeterminationPhysical Review B, 1939